Electrolux 59840 user manual Setting delay timer, Setting child lock

Page 18

18Daily use

If the programme duration is not selected, the duration is automatically set to 10 mins.

Setting delay timer

With the DELAY button, you can delay the start of a programme by between 30 mi- nutes (30') and a maximum of 20 hours (20h).

1. Select the programme and additional functions.

2.Press the DELAY button as many times as necessary until the required start delay appears on the display, e.g. 12h if the programme is to be started in 12 hours.

If the display is showing 20h and you press the button again, the time delay will be cancelled. The display will show 0'and then the duration of the se- lected programme.

3.To activate the delay timer, press the START PAUSE button. The amount of time remaining until the programme is set to start is continuously displayed (e.g. 15h, 14h, 13h, … 30' etc).

Setting child lock

The child lock can be set to prevent a programme being accidentally started or a programme in operation being accidentally changed. The child lock function locks all buttons and the programme knob. The child lock can be activated or deactivated by holding down the LONG ANTI-CREASE and BUZZER buttons simultaneously for 5 seconds.

– Before programme is started: Appliance cannot be used

– After programme is started: Programme in operation cannot be changed

The ( icon appears in the display to indicate that the child safety device is activated. The child safety device is not deactivated once the programme comes to an end.

If you want to set a new programme, you must first deactivate the child safety device.

Image 18

Contents Lavatherm Dear Customer Contents Guarantee/Customer Service European GuaranteeImportant safety information General safetyInstallation Child safety UseProduct description What is shown in the display Control panelBefore first use Sorting by care label. The care labels mean Sorting and preparing laundrySorting laundry Preparing laundryProgramme chart TimeMixed BED Linen Viscose Jeans Wool Opening loading door / loading laundry Switching machine on / switching light onDaily use Selecting the programmePress the Dryness button repeatedly until Setting dryness levelSetting the pre-drainage spin speed If the washing in the washing machine wasSetting long anti-crease function BuzzerTime Setting delay timer Setting child lockStarting the programme Changing programmePress the Start Pause button. The pro- gramme is started Drying cycle complete / removing laundry Open doorClose the door Care and cleaning Cleaning fluff filterAfter cleaning do not forget to put it back Clean the entire filter area Cleaning the door seal Emptying the condensate tankEmpty condensate tank after every drying cycle Cleaning heat exchanger filter Care and cleaning Open loading door Cleaning the drum Clean operating screen and housing Troubleshooting by yourself What to do ifChanging the bulb for interior lighting What to do ifWhat to do if Replace defective bulb Screw cover back down Machine settings Buzzer permanent offTechnical data Use Domestic Permissible ambient temperature + 5C to + 35CConsumption values Hints for test institutesCotton cycle with nominal and half load Installation Transporting the applianceAppliance positioning Removing transport safety packaging Remove foil hose and polystyrene padding from the machineElectrical connection Permanent connection Changing door stopSpecial accessories Intermediate installation kit for stacked washer and dryerInstallation Environment Packaging materialOld appliance Environmental tips Service and Spare Parts Guarantee/Customer ServiceStandard guarantee conditions Exclusions01 4090751 Email service.eid@electrolux.ie Customer CareEuropean Guarantee Service Deutschland +49 Schweiz Suisse Svizzera 125989520-01-14012008