Electrolux 59840 user manual Cleaning heat exchanger filter

Page 24

24Care and cleaning

2. Pour condensed water out into a ba- sin or similar receptacle.

3. Slide outlet connections in and refit condensate tank.

If the programme has been interrup- ted as a result of the condensate tank being full: Press the START PAUSE button to continue the drying cycle.

The condensate tank has a volume of approx. 4 litres. This is sufficient for around 7kg of laundry which has previously been spun at 1000 revolutions/ minute.

The condensate can be used as distilled water, e.g. for steam ironing. However first filter the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.

Cleaning heat exchanger filter

If the indicator CLEAN BASE FILTER lights up, the heat exchanger filter in the base of the appliance must be cleaned.

To protect the heat pump from dirt, the dryer is fitted with fluff filter, which is located in the filter housing. Here too large amounts of fluff build up over time, which affect the function of the appliance.

IMPORTANT

•Operating when the fluff filter is clogged with fluff can damage the dryer. This also increases energy consumption.

•Never operate the dryer without the fluff filters.

•Do not use the dryer without the fluff filter. A dirty heat pump requires more energy and can only be cleaned up by means of a costly process.

Image 24

Contents Lavatherm Dear Customer Contents Guarantee/Customer Service European GuaranteeImportant safety information General safetyInstallation Child safety UseProduct description What is shown in the display Control panelBefore first use Sorting and preparing laundry Sorting laundrySorting by care label. The care labels mean Preparing laundryProgramme chart TimeMixed BED Linen Viscose Jeans Wool Switching machine on / switching light on Daily useOpening loading door / loading laundry Selecting the programmeSetting dryness level Setting the pre-drainage spin speedPress the Dryness button repeatedly until If the washing in the washing machine wasSetting long anti-crease function BuzzerTime Setting delay timer Setting child lockStarting the programme Changing programmePress the Start Pause button. The pro- gramme is started Drying cycle complete / removing laundry Open doorClose the door Care and cleaning Cleaning fluff filterAfter cleaning do not forget to put it back Clean the entire filter area Cleaning the door seal Emptying the condensate tankEmpty condensate tank after every drying cycle Cleaning heat exchanger filter Care and cleaning Open loading door Cleaning the drum Clean operating screen and housing Troubleshooting by yourself What to do ifChanging the bulb for interior lighting What to do ifWhat to do if Replace defective bulb Screw cover back down Machine settings Buzzer permanent offTechnical data Use Domestic Permissible ambient temperature + 5C to + 35CConsumption values Hints for test institutesCotton cycle with nominal and half load Installation Transporting the applianceAppliance positioning Removing transport safety packaging Remove foil hose and polystyrene padding from the machineElectrical connection Permanent connection Changing door stopSpecial accessories Intermediate installation kit for stacked washer and dryerInstallation Environment Packaging materialOld appliance Environmental tips Guarantee/Customer Service Standard guarantee conditionsService and Spare Parts Exclusions01 4090751 Email service.eid@electrolux.ie Customer CareEuropean Guarantee Service Deutschland +49 Schweiz Suisse Svizzera 125989520-01-14012008