Electrolux 59840 user manual Cleaning the door seal, Emptying the condensate tank

Page 23

Care and cleaning 23

11. Press against the large mesh filter until it locks into the interlock.

If the fine strainer is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has finished.

Emptying the condensate tank

Empty condensate tank after every drying cycle.

If the condensate tank is full, an active programme will break off automatically and the EMPTY CONTAINER icon on the display will light up. In order to continue the programme, the condensate tank must first be emptied.

WARNING!

The condensate is not suitable for drinking or for preparing foodstuffs.

1.Take out drawer containing con- densed water container completely 1 and pull up the condensed water container’s drainage pipe as far as it will go 2.

2

1

Image 23
Contents Lavatherm Dear Customer Contents European Guarantee Guarantee/Customer ServiceGeneral safety Important safety informationInstallation Use Child safetyProduct description Control panel What is shown in the displayBefore first use Preparing laundry Sorting and preparing laundrySorting laundry Sorting by care label. The care labels meanTime Programme chartMixed BED Linen Viscose Jeans Wool Selecting the programme Switching machine on / switching light onDaily use Opening loading door / loading laundryIf the washing in the washing machine was Setting dryness levelSetting the pre-drainage spin speed Press the Dryness button repeatedly untilTime Setting long anti-crease functionBuzzer Setting child lock Setting delay timerPress the Start Pause button. The pro- gramme is started Starting the programmeChanging programme Close the door Drying cycle complete / removing laundryOpen door After cleaning do not forget to put it back Care and cleaningCleaning fluff filter Clean the entire filter area Empty condensate tank after every drying cycle Cleaning the door sealEmptying the condensate tank Cleaning heat exchanger filter Care and cleaning Open loading door Cleaning the drum Clean operating screen and housing What to do if Troubleshooting by yourselfWhat to do if Changing the bulb for interior lightingWhat to do if Replace defective bulb Screw cover back down Buzzer permanent off Machine settingsUse Domestic Permissible ambient temperature + 5C to + 35C Technical dataCotton cycle with nominal and half load Consumption valuesHints for test institutes Appliance positioning InstallationTransporting the appliance Remove foil hose and polystyrene padding from the machine Removing transport safety packagingElectrical connection Changing door stop Permanent connectionIntermediate installation kit for stacked washer and dryer Special accessoriesInstallation Old appliance EnvironmentPackaging material Environmental tips Exclusions Guarantee/Customer ServiceStandard guarantee conditions Service and Spare PartsCustomer Care 01 4090751 Email service.eid@electrolux.ieEuropean Guarantee Service Deutschland +49 Schweiz Suisse Svizzera 125989520-01-14012008