Electrolux 59840 user manual Drying cycle complete / removing laundry, Open door, Close the door

Page 20

20Daily use

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0", under anti-

crease icon appear dash. If the BUZZER button has been pressed, an acoustic signal sounds intermittently for about one minute.

The drying cycles (except for the WOOL programme) are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at in- tervals during this phase. This keeps the laundry loose and free of creases. The laundry can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming.) If LONG ANTI-CREASE function has been selected, the anti-crease phase is lengthened by 60 minutes.

1.Open door.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Care and cleaning” chapter.)

3.Remove laundry.

4.Turn the programme selector to OFF.

After each drying cycle:

-Clean the micro-fine filter and fine filter

-Drain the condensed water container (See chapter “Care and cleaning”.)

5.Close the door.

Image 20

Contents Lavatherm Dear Customer Contents Guarantee/Customer Service European GuaranteeImportant safety information General safetyInstallation Child safety UseProduct description What is shown in the display Control panelBefore first use Sorting and preparing laundry Sorting laundrySorting by care label. The care labels mean Preparing laundryProgramme chart TimeMixed BED Linen Viscose Jeans Wool Switching machine on / switching light on Daily useOpening loading door / loading laundry Selecting the programmeSetting dryness level Setting the pre-drainage spin speedPress the Dryness button repeatedly until If the washing in the washing machine wasTime Setting long anti-crease functionBuzzer Setting delay timer Setting child lockPress the Start Pause button. The pro- gramme is started Starting the programmeChanging programme Close the door Drying cycle complete / removing laundryOpen door After cleaning do not forget to put it back Care and cleaningCleaning fluff filter Clean the entire filter area Empty condensate tank after every drying cycle Cleaning the door sealEmptying the condensate tank Cleaning heat exchanger filter Care and cleaning Open loading door Cleaning the drum Clean operating screen and housing Troubleshooting by yourself What to do ifChanging the bulb for interior lighting What to do ifWhat to do if Replace defective bulb Screw cover back down Machine settings Buzzer permanent offTechnical data Use Domestic Permissible ambient temperature + 5C to + 35CCotton cycle with nominal and half load Consumption valuesHints for test institutes Appliance positioning InstallationTransporting the appliance Removing transport safety packaging Remove foil hose and polystyrene padding from the machineElectrical connection Permanent connection Changing door stopSpecial accessories Intermediate installation kit for stacked washer and dryerInstallation Old appliance EnvironmentPackaging material Environmental tips Guarantee/Customer Service Standard guarantee conditionsService and Spare Parts Exclusions01 4090751 Email service.eid@electrolux.ie Customer CareEuropean Guarantee Service Deutschland +49 Schweiz Suisse Svizzera 125989520-01-14012008