Buhler 2895E manual PRE Operation

Page 12

bühler

Allied Front-End Loader

PRE – OPERATION

WARNING The tractor must be equipped with an approved Roll over Protection Structure (ROPS) and safety belts to help prevent personal injury or death caused by tractor roll over.

CAUTION Maximum rated loader capacity may exceed tractor rating. Load restrictions or reduction in hydraulic operating pressure may be required for safe operation.

Rops: Do not exceed the manufacturer’s rating for maximum gross vehicle weight. Refer to the Tractor Manual or the ROPS Serial Decal for rating. Do not alter or modify the ROPS structure.

Tractor Tires: Space rear tires as recommended by the tractor manufacturer. Tire inflation and capacity must meet or exceed additional weight of loader, attachment and payload. Maximize width for high lift applications. Tread width must not exceed maximum width as recommended in the Mounting Kit Listing.

WARNING Add rear ballast to help prevent personal injury or death caused by tractor roll over.

Rear Ballast: Rear ballast is required to ensure 25% of gross vehicle weight is transferred to the rear axle. Attachment and load must be included as weight. Adequate rear weights are required to counterbalance maximum loader capacity and safe loader operation. Weight can be added as rear tire liquid (calcium solution), rear wheel weights, rear axle weights and/or three point hitch mounted ballast or implement. Ballasting will vary with tractor and loader attachment. Refer to the Tractor Manual for recommended ballasting.

- 10 -

P4493

Image 12
Contents Page Warranty Claims Warranty LaborBühler 2895E OPERATOR’S and Parts ManualLoader Specifications Illustration TSL shownSpecification Chart REG TSLIntroduction Serial Number here Safety General Safety Notes Bühler Allied Front-End Loader Safety Decal Location Electrocution Hazard PRE Operation Operation Bucket Backfilling or Scraping Bühler Handling bales and pallets Level indicator Grapple Installing / Removing Loader InstallingRemoving Bühler Installing / Removing Loader Attachments Lubrication TSL Loader ShownMaintenance General InspectionBolt Torque Chart Mounting KitHydraulics Bühler Cable Sleeve Jam Nut Lock Washer Screw TSL General Note and Instructions Trouble Shooting ProblemPossible Cause RemedyTrouble Shooting Problem Possible Cause Remedy 2895E & 2895E S Parts Appendix 2895E Regular and True Self Leveling2895E & 2895E S Main Frame Assembly Item Part No Description 2895E 2895E S 2895E & 2895E S Hydraulic Plumbing Assembly Bühler 2895E TSL & 2895E S TSL Main Frame Assembly 895E TSL & 2895E S TSL Main Frame Assembly Description 2895E TSL 2895E S TSL2895E TSL & 2895E S TSL Hydraulic Plumbing Assembly Item Part No Description 2895E 2895E S Possible Attachment Interference 2895E TSL & 2895E S TSL 2895E Cylinder Assembly TSLHydraulic Fitting Torques Page Buhler Manufacturing a partnership