Buhler 2895E manual Trouble Shooting Problem Possible Cause Remedy

bühler

Allied Front-End Loader

Trouble Shooting Continued

Problem	Possible Cause	Remedy
Insufficient lift capacity.	Improper hydraulic pump	Repair or replace pump.
	operation.
	Load is greater than boom	Check loader specifications.
	lift capacity.
	Internal boom cylinder	Replace any worn parts and
	leakage.	install a seal repair kit.
	Improper hydraulic valve	Repair or replace valve.
	operation.
Slow leak down.	Worn control valve.	Have authorized dealer
	Worn cylinder piston seals.	replace seals.
Excessive wear on bottom of	Float position not used while	Use float position provided on
bucket and wear pads.	operating loader.	valve.
Hydraulic cylinders	Hose from control valve	Refer to plumbing diagrams.
inoperative.	improperly connected.
Pump operating continually on	Tractor control valve relief	See your service manual for
closed center tractor	stuck open.	proper adjustment.
hydraulics system.	Incorrect Auxiliary Valve.	Check with loader dealer for
		proper valve application.
	Hydraulic control valve set to	Adjust valve in accordance
	low.	with manual.
Loader lift and bucket tilt	Hoses improperly	Refer to plumbing diagrams
controls do not work according	connected.	and correct hose connections.
to decal.
Valve noisy and/or hot.	Open center control valve on	Replace relief valve with
	closed center tractor.	closed center plug and plug
		the power beyond adapter on
		valve.
Tractor loads/pump squeals.	Closed center control valve	Install open center plug on
	on open center tractor.	optional valve. Replace
		closed center plug with relief
		and install short plug in place
		of the power beyond adapter.
	Dirt or moisture build up on	Clean spool ends and if
Stiff control valve.
	spool ends.	applicable cable ends at valve.
	Incorrect torque (applies to	Loosen and re-torque bolts to
	sectional valves only).	specs.

- 30 - P4493