Buhler 2895E manual Installing / Removing Loader Attachments

bühler

Allied Front-End Loader

INSTALLING / REMOVING LOADER ATTACHMENTS

Installing:

1. Position tractor centrally within the bucket hooks. Dump Quick-tachslightly from vertical position. Slowly drive the tractor forward until the Quick-tachcontacts the bucket.

2.Slowly raise the loader to engage the Quick-tachwithin both bucket hooks. When

both hooks are resting on the Quick-tachrollback the bucket. Shut tractor off. Lock using both Quick-tachpins and secure with hairpin clips.

CAUTION Verify attachment installation from tractor seat by lowering level attachment to ground and retracting the lift cylinders.

Removing:

1.Rollback attachment and lower near ground position. Shut tractor off.

2. Remove both Quick-tachpins and place in storage position. Place level

attachment on ground. Slowly dump attachment while backing tractor away.

- 21 - P4493