bühler
Allied
For back grading, either load the bucket and position the heel on the ground or position the bucket at 40 or less below level as shown. Place the valve in the float position and back up slowly.
IMPORTANT: Float position must be used to reduce down pressure, otherwise cylinder rod(s) and/or bucket damage could occur.
A – Frame: Standard and Heavy Duty A – Frames can be fitted with either spears or pallet forks.
- Standard Duty
The standard duty frame is for handling medium sized round bales (up to 1000 lbs.) fitted with a single centered 1240mm long heat treated spear and two short stabilizers. For pallet applications with a maximum load up to 2000 lbs. when fitted with 42.0” fork kit.
- Heavy Duty 60”
The Heavy Duty 60” frame is for handling medium to large sized round bales (up to 2000 lbs.) when fitted with two bottom 1240mm long heat treated spears and two short stabilizers. For pallet applications with a maximum payload of 4400 lbs. when fitted with the 48.0” fork kit.
NOTE: The heavy duty frame can also be fitted using only the one center spear as per the standard duty
- 14 - | P4493 |