Sterling 30 cfm, 60 cfm Shipping Information, Unpacking and Inspection, Event of Shipping Damage

Page 2

Shipping Information

Unpacking and Inspection

You should inspect your dryer for possible shipping damage.

Thoroughly check the equipment for any damage that might have occurred in transit, such as broken or loose wiring and components, loose hardware and mounting screws, etc.

In the Event of Shipping Damage

According to the contract terms and conditions of the Carrier, the responsibility of the Shipper ends at the time and place of shipment.

Notify the transportation company’s local agent if you discover damage.

Hold the damaged goods and packing material for the examining agent’s inspection. Do not

return any goods before the transportation company’s inspection and authorization.

File a claim with the transportation company. Substantiate the claim by referring to the agent’s report. A certified copy of our invoice is available upon request. The original Bill of Lading is attached to our original invoice. If the shipment was prepaid, write us for a receipted transportation bill.

Advise customer service regarding your wish for assistance and to obtain an RMA (return material authorization) number.

If the Shipment is Not Complete

Check the packing list as back-ordered items are noted on it. You should have:

;Dehumidifying Dryer

;Bill of lading

;Packing list

;Operating and Installation packet

;Electrical schematic and panel layout drawings

;Component instruction manuals

Re-inspect the container and packing material to see if you missed any smaller items during unpacking.

If the Shipment is Not Correct

If the shipment is not what you ordered, contact the shipping department immediately. For shipments in the United States and Canada, call 1 (800) 233-4819; for all other countries, call our international desk at (630) 475-7491. Have the order number and item number available. Hold the items until you receive shipping instructions.

15, 30, & 60 cfm Compact Dryers

2

Image 2

Contents SDA Series 15, 30, & 60 cfm Compact Dehumidifying Dryers Event of Shipping Damage Shipping InformationUnpacking and Inspection If the Shipment is Not CompleteTable of Contents Maintenance Safety Symbols Used in this Manual SafetyHow to Use This Manual Safety Tag Information Wear Safety Glasses and Work GlovesOperator Responsibility ResponsibilityGeneral Responsibility Remember Maintenance Responsibility Reporting a Safety DefectGeneral Description Functional DescriptionModels Covered in This Manual Electrical Features Standard FeaturesMechanical Features Options Safety Devices and InterlocksController Features Fail Safe Operation Safety Circuit StandardsSafety Device Lock-Outs Rigging and Placing the Dryer InstallationUncrating the Equipment Suggested Lift Rigging for Cart Mount Dryers Electrical Connections Suggested Lift Rigging for Machine Mounted DryersSetup Procedures Checking for Proper Blower Rotation Three-Phase ModelsDrying Hopper Air Trap Considerations Installing Water LinesInitial Start-up Optional AftercoolerAuto-Tuning the Dryer Shutting Down the DryerOperation SwitchesIndicator Lights Controller Description and OperationProcess Air Temperature Controller Indicator Name Description Lit when Control Output 1 is on. The Out1Lit when Control Output 2 is on. Not used Lights in the Operation Indicator Section whenE5CN Operating Parameters Setting the Process Air TemperatureAdjustment Level Indicator Name Description Entering Operating Parameters to Select Modes Optional Setting the High Dew Point AlarmProcess Air Dew Point Display Dryer Operation Procedures Controller OperationAlarm Display Messages High Temp Valve MTR Maintenance Preventative Maintenance ScheduleServicing Process Air Filters Preventative MaintenanceRecommendations for Cleaning and Replacing Filters VacuumingSymptoms of Worn Desiccant Corrective MaintenanceCleaning with Compressed Air Servicing the Dew Point Monitor+ First AID + Replacing Worn DesiccantDesiccant Bed Location and Disassembly Procedures Replacing the Process/Regeneration HeaterReplacing/Cleaning the Cooling Coil Replacement ProceduresPage Troubleshooting IntroductionProc Blwr Determining Temperature Controller Errors or Sensor Errors Using a ThermocoupleTechnical Specifications AppendixDrawings and Diagrams Aftercooler Design SpecificationsHigh Heat Model 180F to 400F Air Flow Schematic Spare Parts List Level 1 Spare Parts List Electrical & MechanicalHI-CORE Desiccant Dryer 15/30/60 CFM Units 30 CFM 60 CFM 120V Control Common Parts 220V Control Common Parts Returned Material Policy Dryer Identification Serial Number TagParts Department Service DepartmentTechnical Assistance Sales Department