Alliance Laundry Systems 602004144 manual Control Instructions, LED OPL Control, EO Control Suffix

Operating Instructions

Control Instructions

ECO

TMB2345N

Figure 3

LED OPL Control

EO Control Suffix

1.Press the Up () or Down () keypad to change cycles.

To customize a cycle, refer to the Programming Manual.

2.Press Start () to start selected cycle.

IMPORTANT: If the loading door or lint panel door is opened during the cycle, the heating system will shut off and the motor will stop. To restart the cycle, both doors must be closed and the

Start () pad must be pressed.

3.When the cycle is complete, open door and remove laundry.

NOTE: This machine includes an anti-wrinkle/ extended tumble feature. After the drying cycle is complete, the cylinder will tumble without heat every few minutes. The intermittent tumbling will continue for one hour or until the door is opened. After an hour the machine enters delayed tumble and will tumble for two minutes every hour for up to 18 hours or until the door is opened.

70400101 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9