Alliance Laundry Systems 602004144 manual Quarterly Maintenance

Page 26

Maintenance

WARNING

To reduce the risk of electric shock, fire, explosion, serious injury or death:

Disconnect electric power to the tumble dryer before servicing.

Close gas shut-off valve to gas tumble dryer before servicing.

Close steam valve to steam tumble dryer before servicing.

Never start the tumble dryer with any guards/panels removed.

Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumble dryer is properly grounded.

W002R1

Quarterly Maintenance

Use a vacuum to clean air vents on drive motors.

Use a vacuum to clean lint from rear limit thermostat cover.

Check and clean steam coils, if applicable.

Check flow of combustion and ventilation air.

Check belt tension and condition.

Replace worn or cracked belts.

24

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

70400101 (EN)

Image 26
Contents Tumble Dryers Page Mise EN Garde Contents Gas Steam Electric IntroductionModel Identification Serial Plate Location Customer ServiceWiring Diagram Safety Information Explanation of Safety MessagesImportant Safety Instructions W055R1 Operating Instructions Operating InstructionsEmergency Stop Button on CE Models EO Control Suffix Control InstructionsLED OPL Control Dual Digital Timer Control QT Control SuffixOperating Instructions Error Codes Display Definition Corrective ActionSingle Drop Control SD and SX Control SuffixesTemperature Selector Switch Door Open ModeEnd of Cycle Mode To Program a Short Test CycleDX4 Coin Control 3V and 3X Control SuffixesDX4 OPL Control 3O Control SuffixIgnition Control Operation for Non- CE Models Lockout Mode Standby ModeStart Up Mode Lockout Manual ResetUnexpected Presence of Flame Flame MonitoringMaintenance DailyMaintenance Bi-Annually MonthlyQuarterly AnnuallyDaily Maintenance Monthly MaintenanceQuarterly Maintenance Bi-Annually Maintenance Annual MaintenanceBefore You Call for Service Not Dry