Alliance Laundry Systems 602004144 manual W055R1

Page 9

23.Remove laundry immediately after tumble dryer stops.

24.Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).

25.Do not tumble fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.

26.Always follow the fabric care instructions supplied by the garment manufacturer.

27.Never operate the tumble dryer with any guards and/or panels removed.

28.DO NOT operate the tumble dryer if it is smoking, grinding, has missing or broken parts.

Safety Information

29.DO NOT bypass any safety devices.

30.Solvent vapors from dry-cleaning machines create acids when drawn through the heater of the drying unit. These acids are corrosive to the tumble dryer as well as to the laundry load being dried. Be sure make-up air is free of solvent vapors.

31.Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

WARNING

To reduce the risk of serious injury, install lockable door(s) to prevent public access to rear of tumble dryers.

W055R1

70400101 (EN)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

7

Image 9
Contents Tumble Dryers Page Mise EN Garde Contents Introduction Model IdentificationGas Steam Electric Customer Service Wiring DiagramSerial Plate Location Explanation of Safety Messages Safety InformationImportant Safety Instructions W055R1 Operating Instructions Emergency Stop Button on CE ModelsOperating Instructions Control Instructions LED OPL ControlEO Control Suffix QT Control Suffix Dual Digital Timer ControlOperating Instructions Display Definition Corrective Action Error CodesSD and SX Control Suffixes Single Drop ControlEnd of Cycle Mode Door Open ModeTemperature Selector Switch To Program a Short Test Cycle3V and 3X Control Suffixes DX4 Coin Control3O Control Suffix DX4 OPL ControlIgnition Control Operation for Non- CE Models Start Up Mode Standby ModeLockout Mode Lockout Manual ResetFlame Monitoring Unexpected Presence of FlameDaily MaintenanceMaintenance Quarterly MonthlyBi-Annually AnnuallyMonthly Maintenance Daily MaintenanceQuarterly Maintenance Annual Maintenance Bi-Annually MaintenanceNot Dry Before You Call for Service