ADC AD-360X2 manual For 120 VAC application only

Page 48

a)Primary Side

This is the incoming voltage side -120 VAC, 208 VAC, 230/240 VAC - of the transformer.

b)Secondary Side

This is the step down side - 24 VAC - of the transformer.

WARNING: 208 VAC and 230/240 VAC ARE NOT THE SAME. ALL voltage connections should be checked and confirmed according to the wiring diagram provided with the individual dryer. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.

IMPORTANT: The ADC Service Department must be contacted prior to any wiring change and/or conversion because, depending on the change/conversion required, some parts may have to be added, deleted, or changed. When, contacting the ADC Service Department, they must be given the correct model number and serial number for the dryer(s).

NOTE: Any wiring change(s) and/or conversion(s) should be accomplished by a QUALIFIED ELECTRICAL TECHNICIAN.

(1)Transformer Wiring

There are six (6) color-coded wires coming from the 24 VAC Transformer. There are four (4) wires coming from the primary (incoming) voltage side of the transformer. Their application and color-coding are as follows:

(a) For 120 VAC application ONLY;

1 - The BLACK and WHITE wires are used.

2 - The Red and Blue wires are capped off individually.

(b)For 208 VAC application ONLY;

1 - The BLACK and BLUE wires are used. 2 - The Red and White wires are capped off

individually.

(c)For 240 VAC application ONLY;

1 - The BLACK and “RED” wires are used.

2 - The White and Blue wires are capped off individually.

There are two (2) yellow or orange wires coming from the secondary (step down) side of the transformer.

(d)One (1) YELLOW or ORANGE wire is connected to the “GND” (ground) termination.

44

Page 47 Page 49
Image 48
Page 47 Page 49
Contents AD-360X2 Retain This Manual In a Safe Place For Future Reference For Your Safety Page Table of Contents Data Label Information Safety Precautions Important InformationRoutine Maintenance CleaningSuggested Interval Adjustments AS RequiredInstallation Requirements ENCLOSURE, AIR SUPPLY, and Exhaust RequirementsElectrical and GAS Requirements Electrical RequirementsOperational Service Check Procedure Description of Parts Control PanelControl and Relay Panels Coin BOXDoor Switch Hinge Block Microprocessor AssemblyBasket Tumbler and Drive Motor Assembly Arrangement Basket TumblerIdler ARM and Impellor Mount Assembly Temperature SensorsDrive Motor and Idler Pulley Arrangement Sail Switch GAS BurnerHI-LIMIT Thermostat Lint Drawer Switch Front Thruster Wheel Bracket AssemblyLint Drawer Rotational Sensor Assembly Rear Basket Tumbler Drive WheelsService IntroductionControls Computer To Replace ComputerTo Replace Keyboard Touch PAD To Replace Coin AcceptorTo Replace GAS Valve To Replace the Ignitor Probe Burner Controls GAS To Test and Adjust GAS Water Column W.C. Pressure To Convert from Natural to Liquid Propane L.P. GAS Thermostats and Temperature Sensor To Replace Direct Spark Ignition DSI ModuleTo Replace HI-LIMIT Thermostat To Remove the Temperature Sensor or High Heat Protector Sail Switch Assembly To Replace Sail SwitchTo Adjust Sail Switch To Replace Main Door Switch To Install NEW Main Door GlassFront Panel and Main Door Assemblies To Replace Main Door Hinge BlocksTo Replace Front Panel To Replace the Nylon CatchTo Replace Rotational Sensor Switch Basket Tumbler Removal Basket Tumbler Wheel RemovalBCD-1 Type Module General System InformationVAC Transformer Page 760 Direct Spark Ignition DSI Flowchart Lockout Until power is removed From controlTroubleshooting Test EquipmentDSI Ignitor GAP Feeler Gauge 1/8 Page Page First Visual Check Second Visual Check Third Visual Check For Leaks Withaflame Blink Green Continuously Continuously Page For 120 VAC application only ADC PN 128927 5N7 Redundant GAS Valve Direct Spark Ignition DSI System Components Troubleshooting Phase 5 Coin System DiagnosisDiagnostics L.E.D. Display Failure Codes Page D. Display Indicators No Heat Condition Blower is on Page No Start Condition No Display Condition 115 VACDSFL Display Condition DOOr Display Condition Data Label Information Data LabelUsing a Manometer HOW to USE a Manometer ADC PNLight Emitting Diode L.E.D. Display Codes Page Page ADC450213 1 08/18/03-25
Related manuals
Manual 38 pages 18.19 Kb

AD-360X2 specifications

The ADC AD-360X2 is a high-performance audio component designed for audiophiles and professionals who demand quality and reliability. This digital-to-analog converter (DAC) is engineered to deliver superior sound quality, with an emphasis on precision and clarity.

One of the standout features of the AD-360X2 is its dual DAC architecture, which utilizes two high-end digital-to-analog chips to ensure a pristine audio output. This design not only enhances the audio resolution but also minimizes noise and distortion, resulting in a richer listening experience. The device supports high-resolution formats, including DSD and PCM, enabling users to enjoy their music in the highest quality available.

The AD-360X2 also boasts a wide range of connectivity options, allowing it to interface seamlessly with various audio devices. It includes USB, optical, and coaxial inputs, making it compatible with computers, CD players, and digital media players. This versatility means that users can easily integrate the AD-360X2 into their existing audio setup, enhancing their overall experience.

Another impressive characteristic of the AD-360X2 is its built-in headphone amplifier. This feature allows users to connect their headphones directly to the unit, providing an optimized listening experience without the need for additional equipment. The headphone amplifier is designed to drive a wide range of headphone impedances, ensuring compatibility with everything from high-impedance studio headphones to more consumer-oriented options.

Additionally, the AD-360X2 integrates advanced clock technology to enhance timing accuracy. The precision clock circuit works to reduce jitter, which is often a major source of distortion in digital audio systems. By ensuring that the signal is processed with impeccable timing, the device further elevates audio quality.

User-friendliness is another significant aspect of the AD-360X2. The device features a straightforward control interface, with an easy-to-read display that provides real-time information about the audio being played. This simplicity ensures that both novices and seasoned audio enthusiasts can operate the device with ease.

In conclusion, the ADC AD-360X2 is an exemplary digital-to-analog converter that combines high-end audio performance with user-friendly features. Its dual DAC architecture, extensive connectivity options, built-in headphone amplifier, and advanced clock technology make it a standout choice for anyone seeking to elevate their audio experience. Whether for personal use or professional applications, the AD-360X2 is engineered to meet and exceed the expectations of discerning audio lovers.
Top Page Image Contents