Filter Information, ADH-75, ADH-170 | American Dryer Corp ADH-120

ADH-75, ADH-170

Filter Information ______________________

The filter housing is where the pre-filters and HEPA filters are contained. On the upper most rails is where the pre-filters are installed and on the rails below that, the HEPA filters are installed. The ADH-120 requires 2 of each pre-filters and HEPA filters. (All filters must be supplied by customer.)

HEPA Pressure Gauge/Alarm Addendum

This HEPA dryer is equipped with a Differential Pressure Gauge/Alarm Switch.

When the dryer is in operation, this device displays the differential pressure across the HEPA filters, and sets off an alarm if the “Preset Pressure Setting” has been exceeded.

Once the alarm sounds it will remain “ON” until the differential pressure is below its preset value, and the “Alarm Reset” button is pressed.

Note

!All filter manufacturers supply technical data, which will permit full utilization of their filters. This

data will include the recommended resistance, in in W.C., at which point the filter should be replaced or serviced. Refer to this data to determine the “alarm” value best for your application.

For HEPA dryers built after July 2001.

Filter Requirement

Filter	H	W	D	CFM	Operating
Description	H	W	D	CFM	Temp
Description					Temp

Pre-Filter	24”	24”	2”	1100	300° F
(Qty: 2)	60.96 cm	60.96 cm	5.08 cm	31.15 cmm	150° C
HEPA/ULPA	24”	24”	11-1/2” *	1100	300° F
(Qty: 2)	60.96 cm	60.96 cm	29.21 cm	31.15 cmm	150° C

Shaded areas are stated in metric equivalents * Does not include 1/4-inch thick gasket.

Filter Replacement

The frequency at which filters have to be replaced is best determined by each location.

•Verify main door is closed

(this is to eliminate contamination of clean room).

•Discontinue electrical power to the dryer.

•Remove filter access cover plate.

•Remove pre-filters.

•Remove HEPA filters.

•Replace both HEPA and pre-filters.

•Reinstall filter cover plate.

•Perform any necessary scrubbing of the dryer.

•Reestablish electrical power to the dryer.

NOTES ______________________________________________________

_____________________________________________________________

American Dryer Corp.

113247 - 3

ADH-120, ADH-75, ADH-170 specifications

American Dryer Corp is renowned for its high-quality commercial dryer machines, catering to the needs of various industries, particularly in laundromats, hospitality, and healthcare. Among their extensive lineup, the ADH-170, ADH-75, and ADH-120 stand out for their efficiency, durability, and innovative technology designed to enhance user experience and operational efficiency.

The ADH-170 is a heavy-duty dryer known for its impressive capacity and rapid drying times. With a substantial drum size, it can accommodate large loads, making it ideal for high-traffic commercial environments. This model features advanced moisture sensing technology that automatically adjusts drying times based on the moisture content of the load, ensuring optimal performance while conserving energy. The durable construction and rust-resistant materials also mean that the ADH-170 is built to withstand the rigors of daily use.

The ADH-75 is designed for establishments that require a balance of capacity and efficiency. It offers a slightly smaller drum size compared to the ADH-170 but maintains robust performance characteristics. This model is equipped with an intuitive control panel that allows operators to select various drying cycles and settings, optimizing the dryer’s performance for different fabric types. The ADH-75 also incorporates energy-saving features, such as a cool-down cycle that helps prevent fabric from overheating, thus prolonging garment life.

The ADH-120 is a versatile dryer that strikes an excellent balance between capacity and flexibility. This model comes with an innovative air-flow design, promoting quicker drying times and reducing energy consumption. Its ergonomic design ensures ease of use, while safety features protect operators and users alike. Furthermore, the ADH-120 is outfitted with user-friendly controls that provide programmable settings, making it suitable for various commercial applications.

Overall, the American Dryer Corp ADH series exemplifies a commitment to quality and performance in commercial laundry solutions. From the high-capacity ADH-170 to the efficient ADH-75 and the adaptable ADH-120, each model integrates advanced technology and robust design, making them reliable choices for businesses looking to optimize their laundry operations. With their user-friendly features and energy-efficient solutions, American Dryer Corp continues to set the standard in the commercial dryer market, ensuring customer satisfaction and operational excellence.

ADH-75, ADH-170