American Dryer Corp ADH-120, ADH-170, ADH-75 Service/Parts Information, Warranty Information

Page 31

Service/Parts Information ____________

Service

Service must be performed by a qualified trained technician, service agency, or gas supplier. If service is required, contact the reseller from whom the equipment was purchased. If the reseller cannot be contacted or is unknown, contact the Service Department for a reseller in your area.

Note

!When contacting the Service Department, be sure to give them the correct model number and serial

number so that your inquiry is handled in an expeditious manner.

Parts

Replacement parts should be purchased from the reseller from whom the equipment was purchased. If the reseller cannot be contacted or is unknown, contact the Parts Department for a reseller in your area. Parts may also be purchased directly from the factory by calling the Parts Department at (508) 678-9000 or you may FAX in your order at (508) 678-9447.

Note

!When ordering replacement parts from the reseller or the manufacturer, be sure to give them the

correct model number and serial number so that your parts order can be processed in an expeditious manner.

Warranty Information _________________

Returning Warranty Cards

Before any dryer leaves the factory test area, a warranty card is placed on the back side of the main door glass. These warranty cards are intended to serve the customer where we record the individual installation date and warranty information to better serve you should you file a warranty claim.

If a warranty card did not come with your dryer, contact the Warranty Department or the Service Department at (508) 678-9000.

Important

!A separate warranty card must be completed and returned for each individual dryer.

Note

!Be sure to include the installation date when returning the warranty card(s).

Warranty

For a copy of the commercial warranty covering your particular dryer(s), contact the reseller from whom you purchased the equipment and request a dryer warranty form. If the reseller cannot be contacted or is unknown, warranty information can be obtained from the factory by contacting the Warranty Department at (508) 678-9000.

Note

!Whenever contacting the factory for warranty information, be sure to have the dryer’s model

number and serial number available so that your inquiry can be handled in an expeditious manner.

Returning Warranty Parts

All dryer or parts warranty claims or inquiries should be addressed to the Warranty Parts Department. To expedite processing, the following procedures must be followed:

No parts are to be returned without prior written authorization R.M.A. from the factory.

Note

!An R.M.A. is valid for only 30 days from date of issue.

The R.M.A. issued by the factory, as well as any other correspondence pertaining to the returned part(s), must be included inside the package with the failed merchandise.

Each part must be tagged with the following information:

Model number and serial number of the dryer from which part was removed.

Nature of failure (be specific). Date of dryer installation. Date of part failure.

Specify whether the part(s) being returned is for a credit, replacement, or a refund.

Note

!If a part is marked for a credit or a refund, the invoice number covering the purchase of the

replacement part must be provided.

Warranty tags (Part No. 450064) are available at “no charge” from ADC upon request.

The company returning the part(s) must clearly note the complete company name and address on the outside of the package.

All returns must be properly packaged to ensure that they are not damaged in transit. Damage claims are the responsibility of the shipper.

Important

!No replacements, credits, or refunds will be issued for merchandise damaged in transit.

All returns should be shipped to the factory in such a manner that they are insured and a proof of delivery can be obtained by the sender.

Shipping charges are not the responsibility of ADC. All returns should be “prepaid” to the factory. Any “C.O.D.” or “COLLECT” returns will not be accepted.

Important

!No replacements, credits, or refunds will be issued if the claim cannot be processed due to insufficient

information. The party filing the claim will be notified in writing, either by “FAX” or “CERTIFIED MAIL – Return Receipt Requested,” as to the information necessary to process claim. If a reply is not received by the Warranty Department within 30 days from the FAX/letter date, then no replacements, credits, or refunds will be issued, and the merchandise will be discarded.

113247 - 3

www.amdry.com

31

Image 31
Contents American Dryer Corporation Installation ManualRetain This Manual in a Safe Place for Future Reference Table of Contents What To Do If You Smell Gas Safety Precautions54.61 cm ADH-75 SpecificationsADEH-75 Hepa Filter Dryer ADH-120 Specifications ADEH-120 Hepa Filter Dryer ADSH-120 Hepa Filter Dryer ADSH-120 Component Identification Front View ADSH-120 Component Identification Rear View 79.69 cm ADH-170 SpecificationsADSH-170 Hepa Filter Dryer ADSH-170 Component Identification Front View ADSH-170 Component Identification Rear View Leveling Dryer ADH-75 Installation ProceduresUnpacking/Setting Up Location RequirementsFresh Air Supply Requirements Dryer Enclosure RequirementsOutside Ductwork Protection Exhaust RequirementsSingle Dryer Venting Vertical Venting Horizontal VentingADH-170 Multiple Dryer Common VentingADH-75 ADH-120Electrical Information Grounding ADEH-75 Electric Models OnlyADEH-120 Electric Models Only ADEH-170 Electric Models OnlyFor 110V Applications Single-Phase 1ø ADSH-75 Only Wiring Connections/HookupElectrical Connections Steam Models OnlyFor 208-240V Applications Phase 3ø Wiring Connections/HookupElectrically Heated Models Only Steam Coil pH Level Steam InformationSteam Requirements High Pressure Air Requirements Installation InstructionsSteam Damper System Operation Adjustment ADSH-120 Only Steam Damper Air System ConnectionsSteam Damper System Operation ADH-75, ADH-170 Hepa Pressure Gauge/Alarm AddendumFilter Replacement Filter InformationPreoperational Test Preparation for Operation/Start-UpShutdown Instructions Mechanical TimerPreoperational Instructions Non-Coin ModelsWarranty Information Service/Parts InformationRoutine Maintenance Data Label Information Procedure for Functional Check Replacement ComponentsHigh Temperature Alarm Manual Reset Burner Hi-Limit InstructionsDoor Interlock 113247 ADC Part No 08/15/07

ADH-120, ADH-75, ADH-170 specifications

American Dryer Corp is renowned for its high-quality commercial dryer machines, catering to the needs of various industries, particularly in laundromats, hospitality, and healthcare. Among their extensive lineup, the ADH-170, ADH-75, and ADH-120 stand out for their efficiency, durability, and innovative technology designed to enhance user experience and operational efficiency.

The ADH-170 is a heavy-duty dryer known for its impressive capacity and rapid drying times. With a substantial drum size, it can accommodate large loads, making it ideal for high-traffic commercial environments. This model features advanced moisture sensing technology that automatically adjusts drying times based on the moisture content of the load, ensuring optimal performance while conserving energy. The durable construction and rust-resistant materials also mean that the ADH-170 is built to withstand the rigors of daily use.

The ADH-75 is designed for establishments that require a balance of capacity and efficiency. It offers a slightly smaller drum size compared to the ADH-170 but maintains robust performance characteristics. This model is equipped with an intuitive control panel that allows operators to select various drying cycles and settings, optimizing the dryer’s performance for different fabric types. The ADH-75 also incorporates energy-saving features, such as a cool-down cycle that helps prevent fabric from overheating, thus prolonging garment life.

The ADH-120 is a versatile dryer that strikes an excellent balance between capacity and flexibility. This model comes with an innovative air-flow design, promoting quicker drying times and reducing energy consumption. Its ergonomic design ensures ease of use, while safety features protect operators and users alike. Furthermore, the ADH-120 is outfitted with user-friendly controls that provide programmable settings, making it suitable for various commercial applications.

Overall, the American Dryer Corp ADH series exemplifies a commitment to quality and performance in commercial laundry solutions. From the high-capacity ADH-170 to the efficient ADH-75 and the adaptable ADH-120, each model integrates advanced technology and robust design, making them reliable choices for businesses looking to optimize their laundry operations. With their user-friendly features and energy-efficient solutions, American Dryer Corp continues to set the standard in the commercial dryer market, ensuring customer satisfaction and operational excellence.