American Dryer Corp ID-120 SPECIFICATIONS/COMPONENT Identification, Specifications GAS and Steam

SECTION II

SPECIFICATIONS/COMPONENT IDENTIFICATION

A. SPECIFICATIONS (GAS AND STEAM)

MAXIMUM CAPACITY (DRY WEIGHT)		120 lbs				54.43 kg
BASKET (TUMBLER) DIAMETER		44-1/2”				113 cm
BASKET (TUMBLER) DEPTH		42-1/2”				108 cm
BASKET (TUMBLER) MOTOR		1 HP				0.746 kw
BLOWER MOTOR		3 HP			2.238 kw
DOOR OPENING (DIAMETER)		31-3/8”				79.7 cm
BASKET (TUMBLER) VOLUME		38.2 cu. ft.			1.08 cu. m.
DRYERS PER 20’/40’ CONTAINER				3/7
DRYERS PER 45’/48’ TRUCK				9/9
	VOLTAGE AVAILABLE	208-460v	3ø	3, 4w		50/60 Hz
	HEAT INPUT	415,000 btu/hr			104,580 kcal/hr
Gas	APPROX. WEIGHT (UNCRATED)	1,500 lbs				680.4 kg
	APPROX. WEIGHT (CRATED)	1,725 lbs				782.5 kg
	AIRFLOW	2,800 cfm			79.29 cmm
	INLET PIPE SIZE	1”				2.54 cm
	COMPRESSED AIR @ 80 PSI (5.51 BARS)	2.5 cfh				0.07 cmh
	VOLTAGE AVAILABLE	208-460v	3ø	3, 4w		50/60 Hz
Steam	APPROX. WEIGHT (UNCRATED)	1,650 lbs				748.4 kg
	APPROX. WEIGHT (CRATED)	1,875 lbs				850.5 kg
	HEAT INPUT		13 Bhp
	STEAM CONSUMPTION	450 lbs/hr			200.2 kg/hr
	AIRFLOW	2,800 cfm			79.29 cmm
	INLET PIPE SIZE		1-1/4”
	COMPRESSED AIR @ 80 PSI (5.51 BARS)	3.25 cfh				0.09 cmh

Shaded areas are stated in metric equivalents

IMPORTANT: Dryers must be provided with a clean, dry, regulated 80 PSI +/- 10 PSI (5.51 bars +/- 0.69 bars) air supply.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

6