American Dryer Corp D-40 installation manual GAS Information

Page 28

G. GAS INFORMATION

It is your responsibility to have ALL plumbing connections made by a qualified professional to assure that the gas plumbing installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable requirements of the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION.

IMPORTANT: FAILURE TO COMPLY WITH CODES OR ORDINANCES, AND/OR REQUIREMENTS IN THIS MANUAL, CAN RESULT IN PERSONAL INJURY AND IMPROPER OPERATION OF THE DRYER.

The dryer and its individual shutoff valves must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

IMPORTANT: Failure to isolate or disconnect the dryer from supply as noted can cause irreparable damage to the gas valve, which will VOID THE WARRANTY.

WARNING: FIRE OR EXPLOSION COULD RESULT.

1.Gas Supply

The gas dryer installation must meet the American National Standard...National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1 M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION, as well as local codes and ordinances and must be done by a qualified professional.

NOTE: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the data label affixed to the left side panel area behind the top control (access) door. If this information does not agree with the type of gas available, DO NOT operate the dryer. Contact the reseller who sold the dryer or contact the ADC factory.

IMPORTANT: Any burner changes or conversions must be made by a qualified professional.

The input ratings shown on the dryer data label are for elevations up to 2,000 feet (610 meters), unless elevation requirements of over 2,000 feet (610 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (610 meters) is made by changing each burner orifice. If this conversion is necessary, contact the reseller who sold the dryer or contact the ADC factory.

24

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Installation Manual Retain This Manual In a Safe Place For Future Reference Important Note to PurchaserFor Your Safety Page Table of Contents Section Routine Maintenance Important Information Receiving and HandlingSafety Precautions Explosion could ResultStandards Specifications SpecificationsSpecifications Installation Procedures UNPACKING/SETTING UPLocation Requirements Dryer Enclosure Requirements Fresh AIR Supply Requirements Exhaust Requirements Single Dryer Venting Vertical Venting Multiple Dryer Common Venting Illus. C Important Venting Reminders Electrical Information Electrical RequirementsMust be Provided SINGLE-PHASE 1Ø Electrical Connection Leads Important a Circuit Servicing Each Dryer Must be Provided Important a Circuit Servicing Each Dryer Must be Provided 40 GAS Steam GAS Information Type of GAS Page Page Operating Steam Pressure Steam InformationPage Compressed AIR Pressure AIR Supply Page Steam Damper Air Piston Flow Control Operation Adjustment Preparation for OPERATION/START-UP Preoperational Tests GAS Models onlyPreoperational Instructions Coin ModelsPage OPL Models Page Service SERVICE/PARTS InformationParts Warranty Information Returning Warranty CardsWarranty Returning Warranty PartsPage Cleaning Routine MaintenanceSuggested Cleaning Schedule Adjustments LubricationLint Drawer Removal Data Label Information Data LabelSerial Number Reversing Timer SPIN/DWELL Adjustments TIM ING LegendProcedure for Functional Check Replacement Components Page S. In Action F.E. Fire Suppression System F.S.SInstallation Before YOU Start Check Local Codes and PermitsWater Connections Optional Manual Bypass System Reset Electrical RequirementsParts Break Down Comp x 3/8 M.P.T. Brass Connector 822752 ADC 113370 1 03/25/02-25

D-40 specifications

American Dryer Corp has long been recognized as a leader in the manufacturing of high-efficiency commercial dryers, and the D-40 model is a prime example of their commitment to delivering quality, performance, and technological advancements. The D-40 is designed to meet the rigorous demands of laundromats, hotels, and other commercial laundry facilities, offering a perfect balance of power and efficiency.

One of the main features of the D-40 is its robust construction. Built with high-quality materials, this dryer ensures durability and longevity even in high-volume operations. The D-40 is equipped with a large capacity tumbler that can accommodate significant loads, making it an ideal choice for businesses that require efficient drying solutions.

The dryer utilizes a state-of-the-art microprocessor control system, allowing users to program multiple drying cycles tailored to specific fabric types or customer preferences. This technology enables precise drying times and temperatures, which helps to prevent damage to garments while maximizing efficiency. The control panel is user-friendly, featuring clear displays and intuitive navigation, ensuring that operators can quickly set up and adjust cycles as needed.

In terms of energy efficiency, the D-40 is engineered with advanced drying technologies that reduce utility costs. Its high-performance gas burners and optimized airflow design allow for rapid heat distribution, which significantly shortens drying times. The dryer also features a reliable heat exchanger system that ensures consistent heat output while minimizing energy consumption.

Another noteworthy characteristic of the D-40 is its sound-dampening design. The dryer is equipped with noise-reduction technology, allowing it to operate quietly, which is particularly beneficial in environments where noise may disrupt customers or staff.

Safety features are also of paramount importance in the D-40’s design. It includes a protective door interlock system that ensures the dryer cannot operate when the door is open, reducing the risk of accidents. Moreover, the D-40 has been designed with easy access for maintenance, making it simpler for technicians to perform routine checks and repairs.

In conclusion, the American Dryer Corp D-40 stands out in the competitive landscape of commercial dryers by combining high-capacity performance with energy efficiency, advanced technology, and a commitment to safety and durability. Its innovative features make it an ideal choice for businesses looking to optimize their laundry operations.
Top Page Image Contents