Daewoo DWF-756, DWF-806, DWF-808, DWF-805, DWF-803 Water SUP PLY is not Stopped, Concerning Washing

PROBLEM

CHECK POINT CAUSE

SOLUTION

Does the water supply continue while the power is turned off?

NO

Does the water supply start as soon as you press the power switch?

NO

YES

YES

The water inlet valve is defective.

The triac of P.C.B is defective.

Change the water inlet valve.

Change the P.C.B ASS’Y.

WATER SUP-

PLY IS NOT

STOPPED.

Operate the washer after setting the water level to “HIGH”

Does the water supply continue after the water reaches to the “HIGH” level?

YES

Is the air tube of water level switch kinked or deformed?

NO

Normal operation.

YES
	Air tube is defective.	Change the air tube.
NO	Pressure switch is defec-	Change the pressure
	tive.	switch.

CONCERNING WASHING

PROBLEM CHECK POINT CAUSE SOLUTION

Does the motor operate after fin- ishing water supply?

NO	YES
Does pulsator rotate in		YES
only one direction?

The triac of P.C.B is defective.

NO

Change the P.C.B ASS’Y.

Normal

THE PUL-

SATOR DOES

NOT ROTATE

EVEN IF THE

WATER IS

SUPPLED.

Does the motor make operating sound?

YES			NO	YES
	Is the	motor coil dis-			Motor is defective.	Change the motor.
	connected?

Is the connection condi-		NO	Improper connection
tion of capacitor termi-
nal good?
	YES	YES

Is the V-belt worn out?	V-belt is defective.
NO

Connect the terminal properly.

Change the V-belt.

Change the motor.

26TROUBLE SHOOTING