Daewoo DWF-802 Presentation of the P.C.B ASS’Y, Concerning Error Message, Message Cause Solution

Page 31

9. PRESENTATION OF THE P.C.B ASS’Y

CONCERNING ERROR MESSAGE

	MESSAGE		CAUSE	SOLUTION

			Improper installation of drain hose.	Install drain hose properly.

			The drain hose is blocked up by foreign	Remove foreign matter from drain hose.
			The drain hose is blocked up by foreign	Remove foreign matter from drain hose.
			matter.


			Drain motor is inferior.	Change drain motor.

			The water tap is closed.	Open the water tap.

			The water inlet filter clogged.	Clean the water inlet filter.
			The water inlet filter clogged.	Clean the water inlet filter.

			It passes over the 30 minutes, yet it doesn’t	Check whether or not is comes to the
			It passes over the 30 minutes, yet it doesn’t	Check whether or not is comes to the
			come to assigned water level.	assigned water level.

			Wash loads get uneven during spin.	Re-set wash loads evenly.
			Wash loads get uneven during spin.	Re-set wash loads evenly.

			Poor installation of the unit.	Proper installation.

			The lid is opened.	Close the lid.
			The lid is opened.	Close the lid.

			The safety switch is inferior.	Change the safety switch.

			The load sensing is inferior. After the load
			sensing operates about 7 seconds, the
			message is displayed during 1 second and	Change the P.C.B. ASS’Y.
			water level is always fixed ‘high’.
			water level is always fixed ‘high’.

			The water level sensing is inferior.	Check the water level sensor and the
			The water level sensing is inferior.	Check the water level sensor and the
				contact part of the connector.

30PCB ASS’Y

Image 31

Contents Auto Washer Washing Machine DWF-802/805/808 SpecificationsStructure of the Washing Machine Cold → COLD+HOT → HOT Functions of the Control PanelFuzzy → FUZZY+SOAK → Heavy → HEAVY+SOAK → Speedy → Suitwool Fuzzy → Heavy → Suitwool → Blanket → Speedy § Location of Washer Directions for Installation and USEFor SCREW-SHAPED TAP For Ordinary TAPCleaning the Water Inlet Filter Cleaning the Lint FilterCleaning the Drain Filter Effect Feature and Technical ExplanationWater Flow Functional Principle Automatic Drainning Time AdjustmentFlow of the Softener Inside of the Balancer HOW to Check MovementSoftener Dispenser Flow of the SoftenerCIRCULATING-WATER Automatic Unbalance AdjustmentCIRCULATING-WATER Drain Motor HOW to Replace Lint FilterLint Filter Residual Time DisplayPrinciple of Bubble Generator Gear Mechanism ASS’YAcross Section Principle of Intake & Outlet of the AIRFunctional Principle of Trans & Magnet Functional Principle of Bubble Washing MachineGear Mechanism ASS’Y Replacement Directions for Disassembly and Adjustment¡ Lay the front of the washer on the floor Brake Adjustment Motor Synchronous and Valve Replacementnon Pump Model¡ Tool for Replacing the Clutch Boss ASSEMBLE¡ Structure of Gear MechanismHOW to Check the Clutch Spring Problem ProblemProcess of Disassemble ProcessProcess Process of Assemble Use fixing jig and 17mm YES Trouble Shooting GuideConcerning Water Supply Water is Not SUP PliedConcerning Washing Water SUP PLY is not StoppedPUL Sator does Not Rotate Even if Water is Suppled Washer Does not Drain Concerning DrainingWasher Does not Spin YES Concerning SpinningAbnormal Noise DUR- ING Wash Process Motor Rotates When START/HOLD Button is not PressedConcerning Operation Do not Light UPMessage Cause Solution Concerning Error MessagePresentation of the P.C.B ASS’Y Appendix § NON-PUMP,SINGLE Valve § Pump § PUMP, Single Valve Parts Diagram Part Name Part Code Specification Remark 5A COLD/HOT NON-BUBBLE Cord Power AS5A COLD/HOT NON-BUBBLE Dual VALVE, Pump 5A COLD/HOT Bubble Dual ValveParts Diagram Painted Steel Sheet 0.6T LEG Adjust ASWire Power Cord CabinetParts Diagram Stainless Steel Balancer ASTUB TUB UParts Diagram Suspension AS B Cover TUB OTUB O Suspension AS FCircuit Diagram DWF-756/758/806/808 NO. WF750SE001