Daewoo DWF-750, DWF-806, DWF-808, DWF-805 Cleaning the Lint Filter, Cleaning the Water Inlet Filter

Page 9

§HOW TO CLEAN THE FILTER

CLEANING THE LINT FILTER

Pull the Filter frame

Turn the lint filter

1upward.

2inside out, wash the

 

lint off with water.

Lint Filter

Filter Frame

3Return the filter as it was, and insert the filter frame into the slot.

CLEANING THE WATER INLET FILTER

• Clean the filter when water leaks from the water inlet.

Pull the

Turn off the

Pull the

1power plug

2water supply

3inlet filter out.

out before

to the washer

 

cleaning it.

and separate

 

 

the inlet hose.

 

4Remove the dirt from the inlet filter with a brush.

CLEANING THE DRAIN FILTER

In case of “U” shaped drain hose, this filter’s equipped at the back side of washer.

This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ..

If the drain filter is not cleaned at proper time (every 10 times of use), drain problem could be caused.

Put down the

Turn the cap counter-

Pull out the filter assembly off

1remained water in the

2clockwise.

3the case of the main body.

hose. And put a container

 

 

SLIT

under the filter to collect

 

FILTER

 

 

water.

CAP

 

CASE

 

 

 

 

 

CAP

 

FILTER CONTAINER

 

 

 

4Clean the drain filter removing the foreign stuffs.

FILTER

CAP

5Put in the filter along the guiding prominence of the case. Please note the left position of the filter adjusting the groove to the guide rib.

CASE

FILTER

GUIDE

RIB

CAP

SLIT

6Turn the cap clockwise tightly.

CAP

8CONVENIENCE

Image 9
Contents Auto Washer Washing Machine DWF-802/805/808 SpecificationsStructure of the Washing Machine Functions of the Control Panel Cold → COLD+HOT → HOTFuzzy → FUZZY+SOAK → Heavy → HEAVY+SOAK → Speedy → Suitwool Fuzzy → Heavy → Suitwool → Blanket → Speedy § Location of Washer Directions for Installation and USEFor SCREW-SHAPED TAP For Ordinary TAPCleaning the Lint Filter Cleaning the Water Inlet FilterCleaning the Drain Filter Feature and Technical Explanation EffectWater Flow Functional Principle Automatic Drainning Time AdjustmentSoftener Dispenser HOW to Check MovementFlow of the Softener Flow of the Softener Inside of the BalancerAutomatic Unbalance Adjustment CIRCULATING-WATERCIRCULATING-WATER Lint Filter HOW to Replace Lint FilterResidual Time Display Drain MotorPrinciple of Bubble Generator Gear Mechanism ASS’YFunctional Principle of Trans & Magnet Principle of Intake & Outlet of the AIRFunctional Principle of Bubble Washing Machine Across SectionGear Mechanism ASS’Y Replacement Directions for Disassembly and Adjustment¡ Lay the front of the washer on the floor Brake Adjustment Motor Synchronous and Valve Replacementnon Pump Model¡ Tool for Replacing the Clutch Boss ASSEMBLE¡ Structure of Gear MechanismHOW to Check the Clutch Spring Problem ProblemProcess of Disassemble ProcessProcess Process of Assemble Use fixing jig and 17mm Concerning Water Supply Trouble Shooting GuideWater is Not SUP Plied YESWater SUP PLY is not Stopped Concerning WashingPUL Sator does Not Rotate Even if Water is Suppled Washer Does not Drain Concerning DrainingWasher Does not Spin YES Concerning SpinningConcerning Operation Motor Rotates When START/HOLD Button is not PressedDo not Light UP Abnormal Noise DUR- ING Wash ProcessConcerning Error Message Message Cause SolutionPresentation of the P.C.B ASS’Y Appendix § NON-PUMP,SINGLE Valve § Pump § PUMP, Single Valve Parts Diagram Part Name Part Code Specification Remark 5A COLD/HOT NON-BUBBLE Dual VALVE, Pump Cord Power AS5A COLD/HOT Bubble Dual Valve 5A COLD/HOT NON-BUBBLEParts Diagram Wire Power Cord LEG Adjust ASCabinet Painted Steel Sheet 0.6TParts Diagram TUB Balancer ASTUB U Stainless SteelParts Diagram TUB O Cover TUB OSuspension AS F Suspension AS BCircuit Diagram DWF-756/758/806/808 NO. WF750SE001