Maytag W10239302A quick start Additional Features

Page 8

Manual Preset Cycle Settings

Timed Cycles

Temperature

Time

Load Type

 

(Minutes)

 

 

 

TIMED DRY

High

40

Heavyweight items, bulky items,

 

 

bedspreads, work clothes

 

 

 

 

 

TOUCHUP (on some models)

Regular

15

Help to smooth out wrinkles

 

 

 

 

 

QUICK DRY

High

25

Small loads

 

 

NOTES:

A light next to each feature will glow yellow when the feature is selected. The light will not glow when the selection is unavailable with the cycle or option combinations selected.

While a Timed Cycle is running, you can change the settings for Time, Temperature, the WRINKLE PREVENT feature and the cycle signals. Press the START-PAUSE button once to stop the dryer, allowing you to select another cycle.

Press the TIME ADJUST up or down buttons until the desired drying time is displayed. Press TIME ADJUST, and the time will change by 1-minute intervals. Press and hold TIME ADJUST, and the time will change by 5-minute intervals. The initial time displayed is the actual drying time.

Temperature settings can be changed only with Timed Cycles.

Air Dry

Use the Air Dry temperature for items that require drying without heat such as rubber, plastic, and heat-sensitive fabrics. This chart shows examples of items that can be dried using Air Dry or Air Only.

Type of Load

Time*

 

(Minutes)

 

 

Foam rubber - pillows, padded bras, stuffed toys

20 - 30

 

 

Plastic - Shower curtains, tablecloths

20 - 30

 

 

Rubber-backed rugs

40 - 50

 

 

Olefin, polypropylene, sheer nylon

10 - 20

*Reset time to complete drying, if needed.

When using Air Dry or Air Only

Check that coverings are securely stitched.

Shake and fluff pillows by hand periodically during the cycle.

Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Sensor Cycles are not available when using the Air Dry or Air Only setting.

Additional Features

You may follow the progress of your dryer with the drying Status indicator lights.

Steam Cycles

In these cycles, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble at Regular heat for the duration of the cycle. The Steam cycles include Rapid Refresh and Custom Refresh. The heat setting and cycle time are not adjustable for the Rapid Refresh cycle, but can be adjusted for the Custom Refresh cycle.

NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without.

Use of a fabric softener sheet is not recommended with steam cycles as it may cause temporary staining on the clothes.

Steam Preset Cycle Settings

Timed Cycles

Default

Default Time

Load Type

Temperature*

(Minutes)*

 

 

 

RAPID REFRESH

Regular

15

Helps to smooth out

 

 

wrinkles and reduce odors

 

 

from loads consisting of one

 

 

to four dry items.

 

 

 

 

 

CUSTOM REFRESH

Regular

20

Helps to smooth out

 

 

wrinkles in loads left in the

 

 

dryer for an extended

 

 

period.

 

 

 

 

 

*NOTE: The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Regular and High temperature settings can be used for the Custom Refresh cycle.

NOTE: During the Custom Refresh Cycle, you can change the settings for Time, Temperature, the Wrinkle Prevent feature, and Signal On/Off. During the Rapid Refresh Cycle you can change the Wrinkle Prevent and Signal On/Off features. To change other settings, press START-PAUSE twice to stop the dryer and clear the settings. Select another cycle or option.

WRINKLE PREVENT Feature

When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE PREVENT feature periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming.

Press the WRINKLE PREVENT feature to get up to 120 minutes of heat-free, periodic tumbling at the end of a cycle. The Wrinkle Prevent indicator light blinks when this option is selected and that part of the cycle is occurring.

Stop at any time by pressing the WRINKLE PREVENT feature or opening the dryer door.

Other cycles will retain the WRINKLE PREVENT feature setting. (For example, if you select the WRINKLE PREVENT feature in the Normal cycle, the WRINKLE PREVENT feature will be on the next time you select the Normal cycle.)

NOTE: If you do not select the WRINKLE PREVENT feature, the dryer stops after the cool down period.

8

Image 8
Contents Use & Care Guide Guide d’utilisation et d’entretienAssistance or Service If you need replacement partsU.S.A CanadaDryer Safety Your safety and the safety of others are very importantWhat to do if YOU Smell GAS Quick Start GUIDE/DRYER USE Quick Start Guide Press and Hold Start PauseDrying and Cycle Tips CyclesAdditional Features Control Lock Changing the Preset Sensor Cycles Dryness Settings Drying Rack OptionChanging Cycles after pressing START-PAUSE Changing Modifiers and Options after pressing Start-PauseCleaning the Dryer Location Cleaning the Lint ScreenCleaning the Dryer Interior Dryer CareRemoving Accumulated Lint Vacation, Storage, and Moving CareSpecial Instructions for Steam Models Changing the Drum LightTroubleshooting Dryer OperationDryer Results Maytag Laundry Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverAssistance OU Service Aux États-UnisPour plus d’assistance Si vous avez besoin de pièces de rechangeSécurité DE LA Sécheuse Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Guide DE Démarrage Rapide Utilisation DE LA Sécheuse Guide DE Démarrage Rapide Appuyer sans relâcher sur Start PauseProgrammes Conseils de séchageConseils pour les programmes Programmes de détectionRéglages de programme de détection Préréglages des programmes manuelsProgrammes vapeur Préréglages de programme vapeurCaractéristiques supplémentaires Verrouillage des commandes ModificateursOption de grille de séchage Utilisation de la grille de séchageNettoyage au besoin Nettoyage du filtre à charpieNettoyage avant chaque charge Retrait de la charpie accumulée Entreposage ou un déménagementFonctionnement de la sécheuse DépannageChangement de l’ampoule du tambour La sécheuse électrique affiche un message codé Résultats de la sécheuseLa sécheuse affiche un message codé Charpie sur la charge Taches sur la charge ou sur le tambourTemps de programme trop court Charges avec faux plisLa présente garantie limitée ne couvre pas Garantie LimitéeÉléments Exclus DE LA Garantie W10239302A Whirlpool Corporation