Maytag W10096989B, W10097006B-SP warranty Control Panel & Features

Page 5

CONTROL PANEL & FEATURES

1

2

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

5

4

Not all features and options are available on all models.

Appearance may vary.

1POWER/CANCEL BUTTON

Press to turn the dryer on and off.

2DRYER CYCLE KNOB

Use your Dry Cycle Knob to select available cycles on your dryer. Turn the knob to select a cycle for your laundry load. See “Cycle Guide” for detailed descriptions of cycles.

3START/PAUSE BUTTON

Press to start a cycle, or press once while a cycle is in process to pause it.

4OPTIONS

Drum Light

Select Drum Light to turn on the light inside the dryer drum. When pressed during a cycle or not running, the Drum Light turns on and will remain on until DRUM LIGHT is pressed again, or the door is opened and closed, or the door is left open for 30 minutes.

Press DRUM LIGHT at any time to turn the drum light ON or OFF.

Damp Dry Signal (for use with Sensor Cycles only)

Selecting the Damp Dry Signal will alert you when your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing.

5MODIFIERS

Temp Level (for use with Timed Cycles only)

Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting.

NOTE: The Air Dry Temp Level Feature is not available on the Sensor Cycles.

Dryness Level (for use with Sensor Cycles only)

Use the Dryness option to select dryness levels for the Sensor Cycles only.

Wrinkle Prevent Feature

When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE PREVENT feature periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming.

n Get up to 60 or 150 minutes for models with two choices, 90 minutes for models with only one choice of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE PREVENT button to turn ON or OFF at any time before the cycle has ended.

Timed Dry (for use with Timed Cycles only)

Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on the cycle knob or may be located on a separate control.

End Signal

The End Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

Press END SIGNAL until the desired volume (Hi, Low, or Off) is selected.

NOTE: When the Wrinkle Prevent setting is selected and the End Signal is on, the tone will sound every

20 minutes until the clothes are removed, or the Wrinkle Prevent setting ends.

6CYCLE STATUS LIGHTS

Lights indicate the progress of the drying cycles.

5

Image 5
Contents Guide D’UTILISATION ET Dryer Safety Page Good air flow Check Your Vent System for Good AIR FlowMaintain good air flow by Use Sensor Cycles for better fabric care and energy savingsControl Panel & Features Cycle Guide Sensor DRY Cycles Items to dry Cycle Drying Default Available Cycle DetailsCycle Guide Timed DRY Cycles OptionsSetting the Drying Temperature Using Your DryerClean the lint screen Temperature TipsWrinkle Prevent feature Press POWER/CANCEL Setting modifiersSelect the desired cycle Temp Level for use with Timed Cycles onlyPress START/PAUSE to begin cycle Additional features on some modelsCleaning the dryer interior Cleaning the dryer locationCleaning the lint screen Dryer CareTo change the drying settings Reinstalling the DryerVacation, storage, and moving care Moving CareIf you experience Possible Causes Solution TroubleshootingTroubleshooting This limited warranty does not cover Maytag Laundry WarrantySécurité DE LA Sécheuse Page Nettoyer le filtre à charpie avant chaque charge Circulation d’air adéquateTableau DE Commande ET Caractéristiques Par Disponibles Défaut Guide DE Programmes Programmes DE Séchage DE DétectionRéglage de la température de séchage Guide DE Programmes Programmes ManuelsDurée par Options Détails du programme Conseils de températureNettoyer le filtre à charpie Utilisation DE LA SécheuseCharger la sécheuse Sélectionner le programme désiréWrinkle Prevent Caractéristique Sélectionner les réglages de programmeEntretien DE LA Sécheuse Nettoyer l’emplacement de la sécheuseNettoyage de l’intérieur de la sécheuse Retirer la charpie accumuléePrécautions à prendre avant un déménagement Réinstallation de la sécheuseChangement de la lampe du tambour sur certain modèles Pour modifier les réglages de séchageDépannage Dépannage La présente garantie limitée ne couvre pas Garantie DES Appareils DE Buanderie MaytagU.S.A. and Canada U.S.A