Maytag W10097006B-SP, W10096989B Press POWER/CANCEL Setting modifiers, Select the desired cycle

Page 8

 

3. Press POWER/CANCEL

 

5. Setting modifiers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the POWER/CANCEL button to turn on the dryer.

4. Select the desired cycle

Select the desired cycle for your load. See the “Cycle Guide” or the display for more information about each cycle.

The default cycle settings will be shown. For some cycles,

you may select alternate settings by pressing the button for that setting. Time adjusts for Manual Cycles only.

NOTE: Not all modifiers are available with all cycles.

Temp Level (for use with Timed Cycles only)

Press the TEMP LEVEL button to change the drying temperature from the default setting. Press the (+) for more time or (-) less time and the time will change by 1-minute intervals. Press and hold (+) for more time or (-) less time and the time will change by 5-minute intervals.

Dryness Level (for use with Sensor Cycles only)

Normal dryness level is a good starting point for optimal energy savings.

You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.

Sensor Dry cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is used for a starting point for sensor drying. Less Dry removes less moisture and used for loads you may want to put on a hanger to complete drying.

Wrinkle Prevent feature

nGet up to 60 or 150 minutes for models with two choices, 90 minutes for models with only one choice of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE PREVENT button to turn ON or OFF at any time before the cycle has ended.

nThe WRINKLE PREVENT feature is preset to “OFF.” If selected for other cycles, the WRINKLE PREVENT feature setting will remain “ON” the next time that cycle is selected.

8

Image 8
Contents Guide D’UTILISATION ET Dryer Safety Page Check Your Vent System for Good AIR Flow Good air flowMaintain good air flow by Use Sensor Cycles for better fabric care and energy savingsControl Panel & Features Items to dry Cycle Drying Default Available Cycle Details Cycle Guide Sensor DRY CyclesCycle Guide Timed DRY Cycles OptionsUsing Your Dryer Setting the Drying TemperatureClean the lint screen Temperature TipsPress POWER/CANCEL Setting modifiers Wrinkle Prevent featureSelect the desired cycle Temp Level for use with Timed Cycles onlyAdditional features on some models Press START/PAUSE to begin cycleCleaning the dryer location Cleaning the dryer interiorCleaning the lint screen Dryer CareReinstalling the Dryer To change the drying settingsVacation, storage, and moving care Moving CareTroubleshooting If you experience Possible Causes SolutionTroubleshooting Maytag Laundry Warranty This limited warranty does not coverSécurité DE LA Sécheuse Page Circulation d’air adéquate Nettoyer le filtre à charpie avant chaque chargeTableau DE Commande ET Caractéristiques Guide DE Programmes Programmes DE Séchage DE Détection Par Disponibles DéfautGuide DE Programmes Programmes Manuels Réglage de la température de séchageDurée par Options Détails du programme Conseils de températureUtilisation DE LA Sécheuse Nettoyer le filtre à charpieCharger la sécheuse Sélectionner le programme désiréSélectionner les réglages de programme Wrinkle Prevent CaractéristiqueNettoyer l’emplacement de la sécheuse Entretien DE LA SécheuseNettoyage de l’intérieur de la sécheuse Retirer la charpie accumuléeRéinstallation de la sécheuse Précautions à prendre avant un déménagementChangement de la lampe du tambour sur certain modèles Pour modifier les réglages de séchageDépannage Dépannage Garantie DES Appareils DE Buanderie Maytag La présente garantie limitée ne couvre pasU.S.A U.S.A. and Canada