Maytag DV316LG manual 7051#WHVW#PRGH, Continuous Run Mode

7051#WHVW#PRGH

4-2-1. Continuous Run Mode

Continuous Run Mode:

1.Press Signal + Dryness Level for 3 sec during Power On State (Normal User Mode) .

2.Once in Continuous Run Mode, 7-Segment will toggle display “cc” and the remaining time.

3.The previous cycle will restart during Continuous Run Mode until continuous run mode is disabled.

4.During Continuous Run Mode, press Signal + Dryness Level for 3 seconds to return to normal user mode. 7-segment will no long display “cc” and only display the remaining time.

4-2-2. Special Test Mode

Definition of Special Test Mode:

-Dryer must be on before Service Mode can be entered.

-Press Signal and Temp Keys for 3 seconds, or until 3 beeps are heard.

-The machine will now be in Service Mode.

-Upon entry into Service Mode, the Sensor Bar Touch Data will be shown (Default Special Test Mode).

How to Enter:

-To enter Special Test Mode press Signal and Temp Keys for 3 seconds for 3 seconds or until the control beep.

(same for all Frontier models.)

4-2