Maytag DV316LG manual Drum Re, Moval, Motor/Blow, Assembly

Part Name	Descriptive Picture	How To Do
		1.Disconnect power supply to unit.
		2.Remove Top Cover.
		3.Remove Console.
		4.Remove Front Panel.
		5.Remove Console Back Cover.
Drum Re-		6.Remove Front Bulkhead.
		7.Remove belt from Idler Pulley.
moval
		8.Grasp the Drum with one hand
		and the belt with the other. Lift
		the Drum and slide out the front.
		Carefully spread the cabinet as
		needed to gain additional
		clearance.
Rear Roller		1.Disconnect power supply to unit.
		2.Remove Rear Bulkhead.
Removal		3.Remove Roller Keeper and nut.
		1.Disconnect power supply to unit.
		2.Remove Top Cover.
		3.Remove Console.
		4.Remove Front Panel.
		5.Remove Console Back Cover.
		6.Remove Belt from Idler Pulley.
		7.Remove Drum.
Motor/Blow-		8.Remove the two screws securing
er		the Blower Intake Panel to the
		Blower Housing. Remove Blower
Assembly
		Intake panel.
Removal
		9.Removed the screw at the
(1)
		bottom of the blower housing.
		10.Remove the blower attachment
		screw under the Thermistor.
		11.Remove two screws attaching
		the motor bracket to the base.
		12.Disconnect the Motor wire
		harness and the two wires to the
		belt switch.

####

5-4