Maytag DV316LG manual 14-9

39	DRUM	11E : front	E9 Water leakage ERR	AS rerecom-	Check	- In this case you are recommended our
	WASHER	loading		mended	whether there	engineer’s inspection.
	(MODEL	washing			is foreign ma-
	NAME :	machine			terial inserted
	Q1*3*)	error			in the drain
					filter.
40	DRUM	door : front	Ed:Door being not opened	AS rerecom-	It may appear	-There is a cover dettachable at the front bot-
	WASHER	loading		mended	when the the	tom. Pull out the cover to find the handle to open
	(MODEL	washing			door is opened	at the right side. Pull out the handle to open
	NAME :	machine			a certain	the door.
	Q1*3*)	error			minutes after
					the completion
					of washing or
					the electricity
					is interrupted
					in running.
					Check of Bad
					contact of 1st
					door opening
					sensor----
					*check of
					the bending
					of 2nd door
					switch*Do not
					open the door
41	DRUM	front	E6:Overheating error	AS rerecom-	It may appear	- In this case you are recommended our
	WASHER	loading		mended	when the	engineer’s inspection.
	(MODEL	washing			temperarture
	NAME :	machine			rises rapidly.
	Q1*3*)	error
42	DRUM	water	Cold water being not	General		- Check first whether the water supply is cut
	WASHER	supply	supplied	consulting		and also check whether the foreign material is
	(MODEL	related				inserted. If the foreign material is inserted turn
	NAME :					the connection hose of machine to the left to
	Q1*3*)					disconnect and to find the strainer to trap the
						foreign material.
43	DRUM	water	Water being supplied little	General	It may appear	- Is it checked whether the tap is fully open
	WASHER	supply		consulting	when the tap	or there is a foreign material inserted? - First
	(MODEL	related			is not opened	check whether the tap is fully open. And there is
	NAME :				properly or	no fault turn the hose of the machine to the left
	Q1*3*)				there is a for-	to take out strainer in the hole of water entrance.
					eign material	Clean i
					inside.
44	DRUM	water	Detergent being remained	General	It may appear	- Sove the detergent wth the hot water and put it
	WASHER	supply		consulting	when the long-	inot the washing box.
	(MODEL	related			term used	If it is not solved even with the normal detergent
	NAME :				detergent is	request an engineer’s inspection.
	Q1*3*)				not well sol-
					uted or when
					the water
					temperature
					is low during
					winter.
45	DRUM	water	Water being stopped dur-	General	It may appear	- Is it checked whether the water is cut or there
	WASHER	supply	ing the coming in	consulting	when the	is a foreign material inserted in the water supply
	(MODEL	related			water is cut	hole? -First check whether the water is cut and
	NAME :				or the water	if there is a blackout push the power button on.
	Q1*3*)				supply hole is	Otherwise turn the machine hose to the left to
					clogged.	take out t
46	DRUM	water	Clothes being damaged	General		- In this case you are recommended our
	WASHER	supply		consulting		engineer’s inspection.
	(MODEL	related
	NAME :
	Q1*3*)
47	DRUM	water	One direction rotation			- In this case you are recommended our
	WASHER	supply				engineer’s inspection.
	(MODEL	related
	NAME :
	Q1*3*)
48	DRUM	water	Rotation being not worked			- In this case you are recommended our
	WASHER	supply	after it sounds with buzz			engineer’s inspection.
	(MODEL	related
	NAME :
	Q1*3*)
49	DRUM	water	Water being not supplied		It may appear	- Make the water supply hole warm and defreeze
	WASHER	supply	in winter		when the tap	it with wet towel.
	(MODEL	related			and the water
	NAME :				supply hose
	Q1*3*)				are frozen if it
					is used at the
					veranda in the
					winter.

14-9