Humminbird MATRIX 12, MATRIX 37 Sonar Menu Tab, Sonar Zoom View Only, To adjust the Zoom Level

Page 17

www..reelschelZoom Lev lmatic..com

(Sonar Zoom View Only)

Zoom Level sets the magnification level for the Sonar Zoom View, and is only available on the X-PressTMMenu when the Sonar Zoom View is active. Use Zoom to increase the display resolution to separate sonar returns that are very close together.

To adjust the Zoom Level:

1.Highlight Zoom Level on the Sonar X-PressTMMenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom Level setting for the Sonar Zoom View. (2x, 4x, 6x, 8x, Default = 2x)

NOTE: The Zoom Preview Box tracks the bottom and cannot be moved by the user.

Sonar Menu Tab

Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor key to select the Sonar tab.

NOTE: Beam Select and 83 kHz Sensitivity will only appear if you have a DualBeam PLUS™ or QuadraBeamTM Matrix Fishing System.

NOTE: Depth Lines, Surface Clutter, Noise Filter, Max Depth, and Water Type only appear in Advanced User Mode.

NOTE: 455 kHz Balance and Transducer Select will only appear if you have a QuadraBeamTM Matrix Fishing System.

Sonar Menu

27

28

Image 17

Contents Operations Manual WwwThank You!..reelschel matic..com Table of ContentsSetup Menu Tab Alarms Menu TabAccessories Menu Tab Troubleshooting Sonar Menu TabQuadraBeam Sonar Single Beam SonarDualBeam Plus Sonar Bait Ball WwwWhat’s On..reelschelthe Disp ay matic..comHard Bottom Soft BottomSonar View Sonar ViewUnderstanding Sonar History Sonar Zoom View Sonar Zoom ViewFull range view DualBeam Plus and QuadraBeamTM Only Big Digits View200/83 kHz Split Sonar View Big Digits ViewQuadraBeamTM Only Bottom PresentationDigital readouts in the Side Beam View cannot be customized Side Beam ViewView Key POWER/LIGHT KeyKey Functions Exit Key WAY Cursor Control KeyMenu System AccessorymBusaticPowering Up the Unit Normal Operation Start-Up Options MenuWith PC Connect Cable Only System StatusPC Connect To adjust the Upper Range To adjust the SensitivitySensitivity Upper RangeTo adjust the Lower Range Chart SpeedTo adjust the Chart Speed To adjust the Bottom ViewSonar Menu Tab To adjust the Zoom LevelSonar Zoom View Only Highlight Zoom Level on the Sonar X-PressTMMenuTo use Beam Select Fish ID+TMHighlight Beam Select on the Sonar main menu To turn Fish ID+ on or offKHz Balance Real Time Sonar RTS WindowKHz Sensitivity To change the Surface Clutter setting To change the Depth Lines settingSurface Clutter AdvancedTransducer Select Max DepthWater Type Fish ID Alarm Depth AlarmLow Battery Alarm Alarm ToneUnits Distance Units DepthUnits Temp Triplog Reset User ModeRestore Defaults LanguageSelect Readouts TemperatureTo Select Views Advanced, Sonar View OnlyTo change the Temp Offset setting To change the Depth Offset settingDepth Offset Temp OffsetTo change the Speed Calibration setting Accessories Menu TabNmea Output Advanced, with Temp/Speed OnlyControl head loses power at high speeds Display ProblemsProblem Possible Cause Isolation Matrix Fishing System AccessoriesSpecifications Contact Humminbird

Related manuals

Manual 31 pages 15.56 Kb