Select Readouts, To Select Views, Voltage

www..reelschel Select Viewsmatic..com

(Advanced)

Select Views sets the available views to either hidden or visible in the view rotation. The view will be removed from the view rotation if it is set to Hidden and will be displayed in the view rotation if it is set to Visible. The following views are available:

•Self Test

•Accessory Test

•Side Beam View (QuadraBeamTM Only)

•Sonar View

•Sonar Zoom View

•SplitSonarView(DualBeamPLUS™andQuadraBeamTM only)

•Big Digits View.

Select Views

The display status of these views can be changed only when in Advanced User Mode

(see Setup Menu Tab: User Mode.)

To Select Views:

1.Make sure you are in Advanced User Mode, then highlight Select Views on the Setup menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.

3.The Select Views submenu will appear, showing a list of all Views that can be hidden or made visible. Use the UP or DOWN Cursor keys to select a particular view, then use the RIGHT or LEFT Cursor keys to change the View status from Visible to Hidden or vice versa.

Select Readouts

(Advanced, Sonar View Only)

Select Readouts sets individual digital readouts on the Sonar View. This Advanced feature allows you to select what data will be displayed in each of either 5 or 6 (depending on your model) fixed- position data windows arranged around the left and bottom edges of the Sonar View screen, or whether a particular window will be turned off, displaying nothing in that area; you can access this menu choice only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

Select Readouts

Data windows can display readouts from supported accessories such as Temp/Speed. Each data window can either be empty or contain one of the following:

-Speed (will be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once, or if a GPS Receiver is connected)

-Temperature

-Triplog (will be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once, or if a GPS Receiver is connected)

-Voltage

-Water Speed (will only be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once). Water Speed is not available with a GPS receiver.