Humminbird 363 manual Save, Edit, or Delete a Waypoint

Page 27

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MARK key to save the current position of the boat as a waypoint.

Save the cursor position as a waypoint: On the Chart or Combo view, use the Cursor key to designate the position you want to save as a waypoint. Then press the MARK key to save the marked position as a waypoint.

Save a position from the sonar history: On any Sonar view, use the Cursor key to point to a feature in the sonar history (also called the Sonar Saver feature). Press the MARK key to create a waypoint at the location where that sonar reading was taken. The new waypoint will also record the depth at that location.

NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is automatically assigned. You can edit the waypoint information later to give it a different name and select an icon to represent it (see Waypoint submenu on the Navigation Main Menu Tab).

Display the Waypoints Submenu: From any view, press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Navigation tab. Select Waypoints and press the RIGHT Cursor key to display the Waypoints submenu.

Program a specific position as a waypoint: To create a waypoint that is NOT your current position, from the Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the Cursor keys to program a waypoint name, latitude, longitude, and icon before selecting Save.

Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to display a list of saved waypoints. Select the waypoint you want to edit and press the RIGHT Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and the UP and DOWN Cursor keys to changes values once you are in a field. In the Waypoint Name, Latitude and Longitude fields, use the UP and DOWN Cursor keys to change the letter or number. All upper and lower case letters are available, as well as digits 0-9 and some punctuation characters. In the Waypoint Icon field, use the UP and DOWN Cursor keys to change the icon used to represent the waypoint on the Combo and Chart Views. You can exit these fields with the LEFT and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor key to save your changes.

20

Image 27

Contents GPS Chartplotter Operations Manual Thank You Table of Contents Iii Key FunctionsSonar Menu Tab Chart Menu Tab Specifications Glossary How Sonar Works Peak to Peak measures power output at the highest points How GPS and Cartography Work DualBeam Plustm SonarPage Bait Ball Hard Bottom Rocky Bottom What’s On the DisplayAdjacent to your boat, including the following items 83 kHz, Wide Beam Hollow Fish SymbolSonar View Zoom View Chart ViewViews Sonar viewsSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Presentation Freeze FramePage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewBig Digits View Circular Flasher ViewBig Digits View Bird’s Eye View Bird’s Eye ViewChart View Chart View without Active CursorChart View with Active Cursor Combo View View OrientationCombo View Chart View with Cursor Present Viewing CartographyIntroduction to Navigation Waypoints, Routes and Tracks Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Navigation X-PressTMmenuSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackInfo Key POWER/LIGHT KeyKey Functions View KeyWAY Cursor Control Key Menu KeyExit Key Mark KeyGoto Key Zoom +/- KeyPress TM Menu Powering Up the UnitMenu System Title ScreenSonar Tab Normal Mode Advanced Mode Start-Up Options Menu Normal OperationNormal Simulator System Status Simulator System StatusSimulator System Status Self Test Screen Accessory TestSystem Status Accessory Test Screen Self TestGPS Diagnostic View GPS Diagnostic ViewSonar X-PressTMMenu Sonar views onlySonar X-PressTMMenu Sensitivity at Low Sensitivity at Medium To adjust the SensitivitySensitivity Highlight Sensitivity on the Sonar X-PressTMmenuUpper Range To adjust the Upper RangeTo adjust the Lower Range Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Bottom View Chart SpeedTo adjust the Chart Speed To adjust the Bottom ViewTo turn on Bottom Lock To adjust the Bottom RangeBottom Range Bottom LockOnly when Navigating Cancel NavigationTo Cancel Navigation Highlight Cancel Navigation on the Sonar X-PressTMmenuNavigation X-PressTMMenu Navigation views onlyNavigation X-PressTMMenu Waypoint Submenu contains the following menu choices Waypoint NameTo view the Waypoint Name Submenu Highlight WaypointName on the Navigation X-PressTMmenuCursor to Waypoint Save Current TrackClear Current Track To Skip Next Waypoint Save Current RouteSkip Next Waypoint To Save Current RouteOnly if a Target is Active Highlight Cancel Navigation on the Navigation X-PressTMmenuRemove Target To Remove a TargetTo Set the Size of the Sonar Window in the Combo View Remove GridSonar Window To Remove a GridWaypoint Name Submenu Most recently-created waypointSonar Menu Press the Menu key twice to access the Main MenuSonar Menu Tab Sonar tabBeam Select To use Beam SelectHighlight Beam Select on the Sonar main menu Fish ID+TM To turn Fish ID+TM on or offTransducer Cone and Fish Arches Highlight Fish ID Sensitivity on the Sonar main menu To change the Fish ID Sensitivity settingTo change the RTS Window setting Fish ID SensitivityHighlight Zoom Width on the Sonar main menu To change the Zoom Width SettingZoom Width KHz SensitivityTo change the Depth Lines setting Depth LinesDepth Lines To change the Surface Clutter setting Surface ClutterSurface Clutter Max Depth To change the Noise Filter settingTo change the Max Depth setting Noise FilterWater Type To change the Water Type settingNavigation Menu Tab Navigation tabNavigation Menu Tab Highlight Current Track on the Navigation main menu Current TrackCurrent Track allows you to view the Current Track submenu To view the Current Track SubmenuHighlight Saved Tracks on the Navigation main menu Saved TracksSaved Tracks allows you to view the Saved Tracks submenu To view the Saved Tracks SubmenuHighlight Waypoints on the Navigation main menu WaypointsWaypoints allows you to view the Waypoints submenu To view the Waypoints SubmenuRoutes Submenu contains the following menu choices RoutesTo view the Routes Submenu Highlight Routes on the Navigation main menuChart Orientation North ReferenceGrid Rotation Track Min Distance To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Trackpoint IntervalMap Datum To change the Map Datum settingTo Delete All Navigation Data To change the Course Project Line settingCourse Projection Line Delete All Nav DataChart Menu Chart Menu TabMap Borders Chart Detail LevelTo change the Chart Detail Level setting Highlight Chart Detail Level on the Chart main menuSet Simulation Position To change the Map Borders settingTo change the Lat/Lon Grid setting Lat/Lon GridTo Clear Map Offset To change the Map Offset settingSet Map Offset Clear Map OffsetAlarms Menu Alarms Menu TabTo change the Fish ID Alarm setting Depth AlarmFish ID Alarm To change the Depth Alarm settingTo change the Temp Alarm setting Low Battery AlarmTemp Alarm To change the Low Battery Alarm settingTo change the Arrival Alarm setting Off Course AlarmArrival Alarm To change the Off Course Alarm settingTo change the Alarm Tone setting Drift AlarmAlarm Tone To change the Drift Alarm settingSetup Menu Tab Setup Menu TabUnits Depth Units TempUnits Distance User Mode Units SpeedLanguage To Restore Defaults Triplog ResetRestore Defaults To Reset TriplogSelect Readouts Default Sonar ViewSelect Readouts Advanced, Sonar view onlyTemp Offset To change the Depth Offset settingTo change the Temp Offset setting Depth OffsetTo change the Local Time Zone To change the Speed Calibration settingSpeed Calibration Local Time ZonePosition Format To change the Daylight Saving Time settingTo change the Position Format setting Daylight Saving TimeTo change the Date Format Time FormatDate Format To change the Time FormatTo turn Nmea Output on or off Nmea OutputTo turn Sonar on or off SonarTo Change the View Status of Any View Views Menu TabSeriesTM Defaults to Simulator with a Transducer Attached TroubleshootingDisplay Problems Problem Possible CauseOr faulty Cavitation from Finding the Cause of NoiseIsolation Boat’s engineSpecifications Sonar Terms GlossaryPage Image Update Page Page Receiver See Transmitter Page Page Page GPS & Navigation Terms 101 102 103 104 105 106 107 108 109 Contact Humminbird