Humminbird 363 manual To turn Nmea Output on or off

Page 91

NMEA Output

(Advanced)

NMEA Output turns the NMEA* output on or off. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.) NMEA Output should be turned On if you connect the NMEA Output wires of the GPS Receiver cable to another NMEA-compatible device, such as an autopilot.

*NMEA 0183 is a National Marine Electronics Association standard for data communication.

The following NMEA sentences are output when NMEA Output is turned On:

DPT- Depth

MTW - Water Temperature

GLL - Lat/Lon Position

GGA - GPS Fix Data

RMC - Recommended Minimum Specific GNSS Data

VTG - Course Over Ground and Ground Speed

ZDA - Time and Date

When navigating, the following NMEA sentences are also output when NMEA Output is turned On:

APB - Autopilot Sentence B

BWR - Bearing and Distance to Waypoint

RMB - Recommended Minimum Navigation Info

To turn NMEA Output on or off:

1.Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or Off (Off, On, Default = Off).

84

Image 91

Contents GPS Chartplotter Operations Manual Thank You Table of Contents Iii Key FunctionsSonar Menu Tab Chart Menu Tab Specifications Glossary How Sonar Works Peak to Peak measures power output at the highest points How GPS and Cartography Work DualBeam Plustm SonarPage Bait Ball Hard Bottom Rocky Bottom What’s On the DisplayAdjacent to your boat, including the following items 83 kHz, Wide Beam Hollow Fish SymbolSonar View Zoom View Chart ViewViews Sonar viewsSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Presentation Freeze FramePage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewCircular Flasher View Big Digits ViewBig Digits View Bird’s Eye View Bird’s Eye ViewChart View without Active Cursor Chart ViewChart View with Active Cursor View Orientation Combo ViewCombo View Viewing Cartography Chart View with Cursor PresentIntroduction to Navigation Waypoints, Routes and Tracks Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Navigation X-PressTMmenuSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackInfo Key POWER/LIGHT KeyKey Functions View KeyWAY Cursor Control Key Menu KeyExit Key Mark KeyGoto Key Zoom +/- KeyPress TM Menu Powering Up the UnitMenu System Title ScreenSonar Tab Normal Mode Advanced Mode Normal Operation Start-Up Options MenuNormal Simulator System Status System Status SimulatorSimulator System Status Self Test Screen Accessory TestSystem Status Accessory Test Screen Self TestGPS Diagnostic View GPS Diagnostic ViewSonar views only Sonar X-PressTMMenuSonar X-PressTMMenu Sensitivity at Low Sensitivity at Medium To adjust the SensitivitySensitivity Highlight Sensitivity on the Sonar X-PressTMmenuUpper Range To adjust the Upper RangeLower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Bottom View Chart SpeedTo adjust the Chart Speed To adjust the Bottom ViewTo turn on Bottom Lock To adjust the Bottom RangeBottom Range Bottom LockOnly when Navigating Cancel NavigationTo Cancel Navigation Highlight Cancel Navigation on the Sonar X-PressTMmenuNavigation views only Navigation X-PressTMMenuNavigation X-PressTMMenu Waypoint Submenu contains the following menu choices Waypoint NameTo view the Waypoint Name Submenu Highlight WaypointName on the Navigation X-PressTMmenuSave Current Track Cursor to WaypointClear Current Track To Skip Next Waypoint Save Current RouteSkip Next Waypoint To Save Current RouteOnly if a Target is Active Highlight Cancel Navigation on the Navigation X-PressTMmenuRemove Target To Remove a TargetTo Set the Size of the Sonar Window in the Combo View Remove GridSonar Window To Remove a GridWaypoint Name Submenu Most recently-created waypointSonar Menu Press the Menu key twice to access the Main MenuSonar Menu Tab Sonar tabTo use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches Highlight Fish ID Sensitivity on the Sonar main menu To change the Fish ID Sensitivity settingTo change the RTS Window setting Fish ID SensitivityHighlight Zoom Width on the Sonar main menu To change the Zoom Width SettingZoom Width KHz SensitivityDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter Max Depth To change the Noise Filter settingTo change the Max Depth setting Noise FilterWater Type To change the Water Type settingNavigation tab Navigation Menu TabNavigation Menu Tab Highlight Current Track on the Navigation main menu Current TrackCurrent Track allows you to view the Current Track submenu To view the Current Track SubmenuHighlight Saved Tracks on the Navigation main menu Saved TracksSaved Tracks allows you to view the Saved Tracks submenu To view the Saved Tracks SubmenuHighlight Waypoints on the Navigation main menu WaypointsWaypoints allows you to view the Waypoints submenu To view the Waypoints SubmenuRoutes Submenu contains the following menu choices RoutesTo view the Routes Submenu Highlight Routes on the Navigation main menuNorth Reference Chart OrientationGrid Rotation Track Min Distance To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Trackpoint IntervalMap Datum To change the Map Datum settingTo Delete All Navigation Data To change the Course Project Line settingCourse Projection Line Delete All Nav DataChart Menu Chart Menu TabMap Borders Chart Detail LevelTo change the Chart Detail Level setting Highlight Chart Detail Level on the Chart main menuSet Simulation Position To change the Map Borders settingTo change the Lat/Lon Grid setting Lat/Lon GridTo Clear Map Offset To change the Map Offset settingSet Map Offset Clear Map OffsetAlarms Menu Alarms Menu TabTo change the Fish ID Alarm setting Depth AlarmFish ID Alarm To change the Depth Alarm settingTo change the Temp Alarm setting Low Battery AlarmTemp Alarm To change the Low Battery Alarm settingTo change the Arrival Alarm setting Off Course AlarmArrival Alarm To change the Off Course Alarm settingTo change the Alarm Tone setting Drift AlarmAlarm Tone To change the Drift Alarm settingSetup Menu Tab Setup Menu TabUnits Temp Units DepthUnits Distance Units Speed User ModeLanguage To Restore Defaults Triplog ResetRestore Defaults To Reset TriplogSelect Readouts Default Sonar ViewSelect Readouts Advanced, Sonar view onlyTemp Offset To change the Depth Offset settingTo change the Temp Offset setting Depth OffsetTo change the Local Time Zone To change the Speed Calibration settingSpeed Calibration Local Time ZonePosition Format To change the Daylight Saving Time settingTo change the Position Format setting Daylight Saving TimeTo change the Date Format Time FormatDate Format To change the Time FormatTo turn Nmea Output on or off Nmea OutputTo turn Sonar on or off SonarTo Change the View Status of Any View Views Menu TabSeriesTM Defaults to Simulator with a Transducer Attached TroubleshootingProblem Possible Cause Display ProblemsOr faulty Cavitation from Finding the Cause of NoiseIsolation Boat’s engineSpecifications Sonar Terms GlossaryPage Image Update Page Page Receiver See Transmitter Page Page Page GPS & Navigation Terms 101 102 103 104 105 106 107 108 109 Contact Humminbird