Humminbird 363 manual Most recently-created waypoint, Waypoint Name Submenu

Page 54

Waypoint [Name]

(Most recently-created waypoint)

Waypoint [Name] allows you to view the waypoints submenu for the most recently created waypoint.

NOTE: You must have pressed the MARK key at least once since you last powered up the fishfinder for this menu choice to appear.

To view the Waypoint [Name] Submenu:

1.Move the cursor to the desired position and press the MARK key once to save a waypoint.

2.Highlight Waypoint[Name] on the Navigation X-PressTMmenu.

3.Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu.

Waypoint [Name] Submenu

The Waypoint Submenu contains the following menu choices:

Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo Views.

Delete allows you to delete a waypoint from the list of saved waypoints.

Go To allows you to select a waypoint and start navigation toward that waypoint, or add that waypoint to the end of the current route.

Target allows you to apply a target to a waypoint selected from the list of waypoints.

Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints.

47

Image 54

Contents GPS Chartplotter Operations Manual Thank You Table of Contents Key Functions IiiSonar Menu Tab Chart Menu Tab Specifications Glossary How Sonar Works Peak to Peak measures power output at the highest points DualBeam Plustm Sonar How GPS and Cartography WorkPage What’s On the Display Bait Ball Hard Bottom Rocky Bottom83 kHz, Wide Beam Hollow Fish Symbol Adjacent to your boat, including the following itemsSonar views Zoom View Chart ViewViews Sonar ViewSonar View Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowFreeze Frame Bottom PresentationPage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewBig Digits View Circular Flasher ViewBig Digits View Bird’s Eye View Bird’s Eye ViewChart View Chart View without Active CursorChart View with Active Cursor Combo View View OrientationCombo View Chart View with Cursor Present Viewing CartographyIntroduction to Navigation Waypoints, Routes and Tracks Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Navigation X-PressTMmenu Add a Waypoint Target or Trolling GridSave, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved TracksView Key POWER/LIGHT KeyKey Functions Info KeyMenu Key WAY Cursor Control KeyZoom +/- Key Mark KeyGoto Key Exit KeyTitle Screen Powering Up the UnitMenu System Press TM MenuSonar Tab Normal Mode Advanced Mode Start-Up Options Menu Normal OperationNormal Simulator System Status Simulator System StatusSimulator Self Test Accessory TestSystem Status Accessory Test Screen System Status Self Test ScreenGPS Diagnostic View GPS Diagnostic ViewSonar X-PressTMMenu Sonar views onlySonar X-PressTMMenu Highlight Sensitivity on the Sonar X-PressTMmenu To adjust the SensitivitySensitivity Sensitivity at Low Sensitivity at MediumTo adjust the Upper Range Upper RangeTo adjust the Lower Range Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Bottom View Chart SpeedTo adjust the Chart Speed Bottom ViewBottom Lock To adjust the Bottom RangeBottom Range To turn on Bottom LockHighlight Cancel Navigation on the Sonar X-PressTMmenu Cancel NavigationTo Cancel Navigation Only when NavigatingNavigation X-PressTMMenu Navigation views onlyNavigation X-PressTMMenu Highlight WaypointName on the Navigation X-PressTMmenu Waypoint NameTo view the Waypoint Name Submenu Waypoint Submenu contains the following menu choicesCursor to Waypoint Save Current TrackClear Current Track To Save Current Route Save Current RouteSkip Next Waypoint To Skip Next WaypointTo Remove a Target Highlight Cancel Navigation on the Navigation X-PressTMmenuRemove Target Only if a Target is ActiveTo Remove a Grid Remove GridSonar Window To Set the Size of the Sonar Window in the Combo ViewMost recently-created waypoint Waypoint Name SubmenuSonar tab Press the Menu key twice to access the Main MenuSonar Menu Tab Sonar MenuBeam Select To use Beam SelectHighlight Beam Select on the Sonar main menu Fish ID+TM To turn Fish ID+TM on or offTransducer Cone and Fish Arches Fish ID Sensitivity To change the Fish ID Sensitivity settingTo change the RTS Window setting Highlight Fish ID Sensitivity on the Sonar main menuKHz Sensitivity To change the Zoom Width SettingZoom Width Highlight Zoom Width on the Sonar main menuTo change the Depth Lines setting Depth LinesDepth Lines To change the Surface Clutter setting Surface ClutterSurface Clutter Noise Filter To change the Noise Filter settingTo change the Max Depth setting Max DepthTo change the Water Type setting Water TypeNavigation Menu Tab Navigation tabNavigation Menu Tab To view the Current Track Submenu Current TrackCurrent Track allows you to view the Current Track submenu Highlight Current Track on the Navigation main menuTo view the Saved Tracks Submenu Saved TracksSaved Tracks allows you to view the Saved Tracks submenu Highlight Saved Tracks on the Navigation main menuTo view the Waypoints Submenu WaypointsWaypoints allows you to view the Waypoints submenu Highlight Waypoints on the Navigation main menuHighlight Routes on the Navigation main menu RoutesTo view the Routes Submenu Routes Submenu contains the following menu choicesChart Orientation North ReferenceGrid Rotation Trackpoint Interval To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Track Min DistanceTo change the Map Datum setting Map DatumDelete All Nav Data To change the Course Project Line settingCourse Projection Line To Delete All Navigation DataChart Menu Tab Chart MenuHighlight Chart Detail Level on the Chart main menu Chart Detail LevelTo change the Chart Detail Level setting Map BordersLat/Lon Grid To change the Map Borders settingTo change the Lat/Lon Grid setting Set Simulation PositionClear Map Offset To change the Map Offset settingSet Map Offset To Clear Map OffsetAlarms Menu Tab Alarms MenuTo change the Depth Alarm setting Depth AlarmFish ID Alarm To change the Fish ID Alarm settingTo change the Low Battery Alarm setting Low Battery AlarmTemp Alarm To change the Temp Alarm settingTo change the Off Course Alarm setting Off Course AlarmArrival Alarm To change the Arrival Alarm settingTo change the Drift Alarm setting Drift AlarmAlarm Tone To change the Alarm Tone settingSetup Menu Tab Setup Menu TabUnits Depth Units TempUnits Distance User Mode Units SpeedLanguage To Reset Triplog Triplog ResetRestore Defaults To Restore DefaultsAdvanced, Sonar view only Default Sonar ViewSelect Readouts Select ReadoutsDepth Offset To change the Depth Offset settingTo change the Temp Offset setting Temp OffsetLocal Time Zone To change the Speed Calibration settingSpeed Calibration To change the Local Time ZoneDaylight Saving Time To change the Daylight Saving Time settingTo change the Position Format setting Position FormatTo change the Time Format Time FormatDate Format To change the Date FormatNmea Output To turn Nmea Output on or offSonar To turn Sonar on or offViews Menu Tab To Change the View Status of Any ViewTroubleshooting SeriesTM Defaults to Simulator with a Transducer AttachedDisplay Problems Problem Possible CauseOr faulty Boat’s engine Finding the Cause of NoiseIsolation Cavitation fromSpecifications Glossary Sonar TermsPage Image Update Page Page Receiver See Transmitter Page Page Page GPS & Navigation Terms 101 102 103 104 105 106 107 108 Contact Humminbird 109