Humminbird 363 Viewing Cartography, Introduction to Navigation, Chart View with Cursor Present

Page 25

Viewing Cartography

In the Chart or Combo Views there are several cartography-related functions that you can access using various keys.

Panning: Use the 4-WAY Cursor keys to move the chart around on the display in the direction of the key being pressed. When you do this, a bull's eye cursor is drawn at the center of the screen and is linked to the boat by a gray line, even if the boat is off the screen. At the same time, the temperature and speed boxes in the lower left corner are replaced with the distance and bearing from the boat to the cursor position and the latitude/longitude coordinates of the cursor.

Chart View with Cursor Present

Zooming: Use the Plus (+) key to Zoom In and the Minus (-) key to Zoom Out showing the cartography at different scales. The scale is indicated on the left side of the display. If you zoom in beyond the available chart data, the display will go into Overzoom mode whereby the last available chart data is amplified to reflect the scale selected. If you zoom in so far that no cartography is available, a lat/long grid will be drawn instead.

Chart Info: Use the INFO key to get detailed information about the chart. If the cursor is active, you will see information about the chart objects located near the cursor.

Introduction to Navigation

Use the 300 SeriesTM Fishing System to establish waypoints at areas of interest and to navigate to those waypoints via a savable route (representing the shortest intended distance between waypoints). You can also view and save tracks, which represent the actual path of the boat.

18

Image 25
Contents GPS Chartplotter Operations Manual Thank You Table of Contents Iii Key FunctionsSonar Menu Tab Chart Menu Tab Specifications Glossary How Sonar Works Peak to Peak measures power output at the highest points How GPS and Cartography Work DualBeam Plustm SonarPage Bait Ball Hard Bottom Rocky Bottom What’s On the DisplayAdjacent to your boat, including the following items 83 kHz, Wide Beam Hollow Fish SymbolViews Zoom View Chart ViewSonar views Sonar ViewSonar View Sonar ViewReal Time Sonar RTS Window Understanding Sonar HistoryBottom Presentation Freeze FramePage Sonar Zoom View Sonar Zoom View200/83 kHz Split Sonar View 200/83 kHz Split Sonar ViewCircular Flasher View Big Digits ViewBig Digits View Bird’s Eye View Bird’s Eye ViewChart View without Active Cursor Chart ViewChart View with Active Cursor View Orientation Combo ViewCombo View Viewing Cartography Chart View with Cursor PresentIntroduction to Navigation Waypoints, Routes and Tracks Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Navigation X-PressTMmenuSave, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current TrackKey Functions POWER/LIGHT KeyView Key Info KeyWAY Cursor Control Key Menu KeyGoto Key Mark KeyZoom +/- Key Exit KeyMenu System Powering Up the UnitTitle Screen Press TM MenuSonar Tab Normal Mode Advanced Mode Normal Operation Start-Up Options MenuNormal Simulator System Status System Status SimulatorSimulator System Status Accessory Test Screen Accessory TestSelf Test System Status Self Test ScreenGPS Diagnostic View GPS Diagnostic ViewSonar views only Sonar X-PressTMMenuSonar X-PressTMMenu Sensitivity To adjust the SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu Sensitivity at Low Sensitivity at MediumUpper Range To adjust the Upper RangeLower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Chart Speed Chart SpeedTo adjust the Bottom View Bottom ViewBottom Range To adjust the Bottom RangeBottom Lock To turn on Bottom LockTo Cancel Navigation Cancel NavigationHighlight Cancel Navigation on the Sonar X-PressTMmenu Only when NavigatingNavigation views only Navigation X-PressTMMenuNavigation X-PressTMMenu To view the Waypoint Name Submenu Waypoint NameHighlight WaypointName on the Navigation X-PressTMmenu Waypoint Submenu contains the following menu choicesSave Current Track Cursor to WaypointClear Current Track Skip Next Waypoint Save Current RouteTo Save Current Route To Skip Next WaypointRemove Target Highlight Cancel Navigation on the Navigation X-PressTMmenuTo Remove a Target Only if a Target is ActiveSonar Window Remove GridTo Remove a Grid To Set the Size of the Sonar Window in the Combo ViewWaypoint Name Submenu Most recently-created waypointSonar Menu Tab Press the Menu key twice to access the Main MenuSonar tab Sonar MenuTo use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches To change the RTS Window setting To change the Fish ID Sensitivity settingFish ID Sensitivity Highlight Fish ID Sensitivity on the Sonar main menuZoom Width To change the Zoom Width SettingKHz Sensitivity Highlight Zoom Width on the Sonar main menuDepth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter To change the Max Depth setting To change the Noise Filter settingNoise Filter Max DepthWater Type To change the Water Type settingNavigation tab Navigation Menu TabNavigation Menu Tab Current Track allows you to view the Current Track submenu Current TrackTo view the Current Track Submenu Highlight Current Track on the Navigation main menuSaved Tracks allows you to view the Saved Tracks submenu Saved TracksTo view the Saved Tracks Submenu Highlight Saved Tracks on the Navigation main menuWaypoints allows you to view the Waypoints submenu WaypointsTo view the Waypoints Submenu Highlight Waypoints on the Navigation main menuTo view the Routes Submenu RoutesHighlight Routes on the Navigation main menu Routes Submenu contains the following menu choicesNorth Reference Chart OrientationGrid Rotation To change the Track Minimum Distance setting To change the Trackpoint Interval settingTrackpoint Interval Track Min DistanceMap Datum To change the Map Datum settingCourse Projection Line To change the Course Project Line settingDelete All Nav Data To Delete All Navigation DataChart Menu Chart Menu TabTo change the Chart Detail Level setting Chart Detail LevelHighlight Chart Detail Level on the Chart main menu Map BordersTo change the Lat/Lon Grid setting To change the Map Borders settingLat/Lon Grid Set Simulation PositionSet Map Offset To change the Map Offset settingClear Map Offset To Clear Map OffsetAlarms Menu Alarms Menu TabFish ID Alarm Depth AlarmTo change the Depth Alarm setting To change the Fish ID Alarm settingTemp Alarm Low Battery AlarmTo change the Low Battery Alarm setting To change the Temp Alarm settingArrival Alarm Off Course AlarmTo change the Off Course Alarm setting To change the Arrival Alarm settingAlarm Tone Drift AlarmTo change the Drift Alarm setting To change the Alarm Tone settingSetup Menu Tab Setup Menu TabUnits Temp Units DepthUnits Distance Units Speed User ModeLanguage Restore Defaults Triplog ResetTo Reset Triplog To Restore DefaultsSelect Readouts Default Sonar ViewAdvanced, Sonar view only Select ReadoutsTo change the Temp Offset setting To change the Depth Offset settingDepth Offset Temp OffsetSpeed Calibration To change the Speed Calibration settingLocal Time Zone To change the Local Time ZoneTo change the Position Format setting To change the Daylight Saving Time settingDaylight Saving Time Position FormatDate Format Time FormatTo change the Time Format To change the Date FormatTo turn Nmea Output on or off Nmea OutputTo turn Sonar on or off SonarTo Change the View Status of Any View Views Menu TabSeriesTM Defaults to Simulator with a Transducer Attached TroubleshootingProblem Possible Cause Display ProblemsOr faulty Isolation Finding the Cause of NoiseBoat’s engine Cavitation fromSpecifications Sonar Terms GlossaryPage Image Update Page Page Receiver See Transmitter Page Page Page GPS & Navigation Terms 101 102 103 104 105 106 107 108 109 Contact Humminbird