Honeywell TE821W user manual Custom Weather Station Settings, Pressure and Weather Forecast Window

Page 16

•Press SET to confirm selection.

•Press UP or DOWN to select the correct minute.

•Press SET to confirm selection and to complete the initial programming for your weather station. After programming is completed, the display will return to the default Clock and Alarm Window.

Note: If you do not complete this sequence your entries will be lost.

Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Window and all previous settings will be cancelled.

Custom Weather Station Settings

The basic operation of your weather station has been designed to work right out of the box 10 minutes after power is provided to the main unit. To use your station, you will have to complete the steps identified under INITIAL SETUP while this section of the manual will provide you with additional operational details and suggestions for custom settings and alarms including:

•The time alarms (Clock and Alarm Window)

•The temperature alerts (Temperature and Humidity Window)

•Daily rainfall alerts (Rain Window)

•Wind alerts (Wind Window)

Pressure and Weather Forecast Window

Your weather station is designed to display (local) barometric pressure, sea level pressure, weather forecast and moon phases. Historical statistics can also be viewed, including the sea-level pressure for the past 24 hours, moon phase for the past and following 39 days, and a selectable bar-chart for viewing pressure/ temperature & humidity history. Pressure is displayed inHg (English), hPa/mBar (scientific) or mmHg (metric). Altitude is displayed in meters or feet.

16

Image 16

Contents Honeywell Table of Contents Appendix City Codes SpecificationsStandard Package Contents InstallationIntroduction Before you beginFeatures Thermo-Hygrometer Sensor TS33CPlacement tips Battery installationMounting Rain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Battery Cover AssemblyMain Unit TimeWeather DisplayAvoid placing the main unit in the following areas Buttons and Controls Selects the next available window counter-clockwise Clock and Alarms Window Clock and Calendar Displays Initial Set upOperation and Window Selection Selecting Clock and Alarm Window Initial Settings City, Time, Date and LanguageCustom Weather Station Settings Pressure and Weather Forecast WindowChanging or Setting Sea Level Pressure Select Pressure and Weather Forecast WindowPressure and Altitude Information Changing Pressure and Altitude ParametersChanging or Setting Altitude Viewing the Pressure, Temperature and Humidity Bar ChartsViewing the Moon Phase History Viewing the Sea Level Pressure HistoryMoon Phase Diagram Weather Forecast Displays Temperature and Humidity Window Viewing Temperature and Humidity for each ChannelTemperature and Dew Point Displays Channel Auto-Scan DisplayTemperature in Celsius or Fahrenheit Temperature AlarmProgramming Upper and Lower limits for Temperature Alarm Disabling Temperature Alarm levelsRainfall Memory Reset Setting Rain Display inches or mmSetting up Daily Rainfall Alert Selecting Rain WindowConfiguring Wind Display Setting Wind Speed in km/h, mph, m/s or knotsDisabling the Daily Rainfall Alert Wind WindowResetting the Wind Statistics Memory Enable/Disable Time AlarmsEnabling or Disabling the Wind Alerts Wind Alert programmingProgramming Time Alarms Disable/Enable Snooze functionDisable alarms Atomic Time ReceptionRemote Sensor Status Memory Reset ProcedureActivate Search for Remote Sensors Maintenance TroubleshootingAppendix City Codes Weather forecast is inaccuratePage Specifications Power 12 AA Batteries included Battery life alkalineWind Direction Wind SpeedWeight without batteries DimensionsDeclaration of Conformity

Related manuals

Manual 33 pages 7.28 Kb