Honeywell TE821W user manual Disabling the Daily Rainfall Alert, Selecting Wind Window

Page 23

Disabling the Daily Rainfall Alert

In the Daily Rainfall Alert Mode press the ALARM/CHART button to disable the alert.

Wind Window

Wind direction is shown by compass points (i.e. NW) or in bearings starting from north (i.e. 22.5º). The unit displays anemometer temperature or wind chill, average wind speed (over the past 10 minutes), gust, and wind other information. It records the maximum wind speed and gusts collected during the day. Wind speed and gust alerts can be programmed based on pre-configured limits. Wind speed is displayed in km/h, mph, m/s or knots.

Selecting Wind Window

Press main unit UP or DOWN until the WIND icon on the display starts flashing.

Note: The wind speed alert is set at 5 mph default and the wind gust alert is set to 7 mph default to prevent false alerts from small fluctuations.

Configuring Wind Display

With the wind icon flashing, press the SET button to alternate between “wind chill with direction in bearings”, “wind chill with direction in compass points”, “anemometer temperature & wind direction in compass points” or “anemometer temperature and wind direction in bearings.”

Setting Wind Speed in km/h, mph, m/s or knots

With the wind icon flashing, press and hold the SET button to set the wind speed units in km/h, mph, m/s or knots.

Viewing Wind Statistics

With the wind icon flashing, press the MEMORY button to recall a current wind speed, a daily maximum wind speed with

“DAILY MAX” displayed, a gust speed with a “GUST” displayed and a daily maximum gust speed with a “GUST DAILY MAX” displayed.

23

Image 23

Contents Honeywell Appendix City Codes Specifications Table of ContentsBefore you begin Standard Package ContentsInstallation IntroductionThermo-Hygrometer Sensor TS33C FeaturesMounting Battery installationPlacement tips Rain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Assembly Battery CoverDisplay Main UnitTime WeatherAvoid placing the main unit in the following areas Buttons and Controls Selects the next available window counter-clockwise Operation and Window Selection Initial Set upClock and Alarms Window Clock and Calendar Displays Initial Settings City, Time, Date and Language Selecting Clock and Alarm WindowPressure and Weather Forecast Window Custom Weather Station SettingsChanging Pressure and Altitude Parameters Changing or Setting Sea Level PressureSelect Pressure and Weather Forecast Window Pressure and Altitude InformationViewing the Sea Level Pressure History Changing or Setting AltitudeViewing the Pressure, Temperature and Humidity Bar Charts Viewing the Moon Phase HistoryMoon Phase Diagram Weather Forecast Displays Channel Auto-Scan Display Temperature and Humidity WindowViewing Temperature and Humidity for each Channel Temperature and Dew Point DisplaysDisabling Temperature Alarm levels Temperature in Celsius or FahrenheitTemperature Alarm Programming Upper and Lower limits for Temperature AlarmSelecting Rain Window Rainfall Memory ResetSetting Rain Display inches or mm Setting up Daily Rainfall AlertWind Window Configuring Wind DisplaySetting Wind Speed in km/h, mph, m/s or knots Disabling the Daily Rainfall AlertWind Alert programming Resetting the Wind Statistics MemoryEnable/Disable Time Alarms Enabling or Disabling the Wind AlertsAtomic Time Reception Programming Time AlarmsDisable/Enable Snooze function Disable alarmsActivate Search for Remote Sensors Memory Reset ProcedureRemote Sensor Status Troubleshooting MaintenanceWeather forecast is inaccurate Appendix City CodesPage Specifications Wind Speed Power 12 AA Batteries includedBattery life alkaline Wind DirectionDimensions Weight without batteriesDeclaration of Conformity

Related manuals

Manual 33 pages 7.28 Kb