Honeywell TE821W Selecting Rain Window, Display Viewing Rain Statistics, Rainfall Memory Reset

Page 22

rainfall can be displayed in mm or inches. There is a daily rainfall alert that can be programmed in the unit if the daily rainfall exceeds a pre-programmed limit.

Selecting Rain Window

Press the UP or DOWN arrow buttons on the main unit until the RAIN icon on the display starts flashing.

Display:

Viewing Rain Statistics

With the rain icon flashing Press either SET or MEMORY button to recall a rain statistics for the past hour, past 24 hours, yesterday, past week or past month.

Note: Last Hour rainfall value is displayed as a rate of rain in either “inch/hr” or “mm/hr”.

Rainfall Memory Reset

With the rain icon flashing, press and hold the MEMORY button to reset all rainfall statistics.

Setting Rain Display; inches or mm

With the rain icon flashing, press and hold the SET button to toggle rainfall data units between mm and inches.

Enabling or Disabling Daily Rainfall Alert

•With the rain icon flashing, press the ALARM/CHART button to display either the current rainfall statistics or the daily rainfall alert with “ALARM HI” displayed.

•If the alert is disabled, the “OFF” will be displayed; otherwise the rainfall alert value will be shown.

•When the rainfall alert is displayed, press the UP or DOWN arrow button to enable or disable it.

Setting up Daily Rainfall Alert

•With the rain icon flashing, press ALARM/CHART button to display the rainfall alert.

•Press and hold ALARM/CHART button until the rainfall alert “ALARM HI” will flash.

•Set the desired value for the Rainfall Alert by using UP or DOWN arrow button. Press and hold either button for fast digits advance.

•Press ALARM/CHART button to confirm selection and the unit will return to the rainfall alert display.

22

Image 22

Contents Honeywell Table of Contents Appendix City Codes SpecificationsIntroduction Standard Package ContentsInstallation Before you beginFeatures Thermo-Hygrometer Sensor TS33CPlacement tips Battery installationMounting Rain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Battery Cover AssemblyWeather Main UnitTime DisplayAvoid placing the main unit in the following areas Buttons and Controls Selects the next available window counter-clockwise Clock and Alarms Window Clock and Calendar Displays Initial Set upOperation and Window Selection Selecting Clock and Alarm Window Initial Settings City, Time, Date and LanguageCustom Weather Station Settings Pressure and Weather Forecast WindowPressure and Altitude Information Changing or Setting Sea Level PressureSelect Pressure and Weather Forecast Window Changing Pressure and Altitude ParametersViewing the Moon Phase History Changing or Setting AltitudeViewing the Pressure, Temperature and Humidity Bar Charts Viewing the Sea Level Pressure History Moon Phase Diagram Weather Forecast Displays Temperature and Dew Point Displays Temperature and Humidity WindowViewing Temperature and Humidity for each Channel Channel Auto-Scan DisplayProgramming Upper and Lower limits for Temperature Alarm Temperature in Celsius or FahrenheitTemperature Alarm Disabling Temperature Alarm levelsSetting up Daily Rainfall Alert Rainfall Memory ResetSetting Rain Display inches or mm Selecting Rain WindowDisabling the Daily Rainfall Alert Configuring Wind DisplaySetting Wind Speed in km/h, mph, m/s or knots Wind WindowEnabling or Disabling the Wind Alerts Resetting the Wind Statistics MemoryEnable/Disable Time Alarms Wind Alert programmingDisable alarms Programming Time AlarmsDisable/Enable Snooze function Atomic Time ReceptionRemote Sensor Status Memory Reset ProcedureActivate Search for Remote Sensors Maintenance TroubleshootingAppendix City Codes Weather forecast is inaccuratePage Specifications Wind Direction Power 12 AA Batteries includedBattery life alkaline Wind SpeedWeight without batteries DimensionsDeclaration of Conformity

Related manuals

Manual 33 pages 7.28 Kb