Honeywell TE821W user manual Selects the next available window counter-clockwise

A. UP	- Selects the next available window counter-clockwise
	- Increases parameters
	-If pressed and held, activates an atomic time signal search
B. DOWN	- Selects the next available window clockwise
	- Decreases parameters
	-If pressed and held, activates all remote sensors signal search
C. SET	- Alternates the parameters for the selected window
	- If depressed and held, enters into the programming mode or
	changes parameter’s units
	- Pressed again closes programming mode and confirms selected
	parameters
D. CHANNEL	- Manually selects the channel # for receiving temperature and
	humidity sensor data
	- Enables the temperature and humidity channel auto-scan mode
	if pressed and held
E. MEMORY	- Records: moon phase, temperature, humidity, rainfall and wind
	records. Then stores in memory
	- Moon phase: Determined by the day of month interval
	- Sets and stores pressure & altitude units in Memory
F. HISTORY	- Allows displaying the sea-level pressure history
G ALARM/CHART	- Displays alarm times and programmed alerts for temperature,
	rainfall and wind.
	- Press and hold, to enter the alarm/alert programming mode
	- Press and hold in pressure and forecast window, to view
	different bar charts
H. SENSOR	- Sets the light sensor to: automatic, on or off
– AUTO, ON, OFF
I. SENSITIVITY	- Adjusts the automatic light sensor sensitivity
– HIGH/LOW
J LIGHT/SNOOZE	- Illuminates the display backlight for 5 seconds
	- Activates Snooze delay for alarms (programmable 1 to 15
	minutes)
K. AC/ DC	- Connects main unit to the power outlet through the AC to 7.5V
ADAPTOR INPUT	DC adapter provided

13