Honeywell TE821W user manual Appendix City Codes, Weather forecast is inaccurate

Page 28

Thermo-Hygrometer

15 minutes

Anemometer (Wind Sensor):

15 minutes

Rain Gauge (Rain Sensor)

30 minutes

 

 

Check or replace the batteries for the corresponding sensor. Then press and hold DOWN arrow button on the main unit to search for all remote signals. If this does not work, check the wireless transmission path from the corresponding sensor to the main unit and change locations to improve reception. Wireless signals pass through solid objects and walls, however, whenever is possible the sensor should be within line-of-sight with the main unit.

The following may cause reception problems:

The remote weather sensor and a main unit are too far from each other.

The signal shielding materials, such as metal surfaces, concrete walls or dense vegetation, are in the path of transmission.

Interference from wireless devices such as: cordless phones, radio headsets and baby listening devices or electronic appliances.

Q:“My weather station readings are different from TV, radio or official weather reports.”

A:The weather data may vary considerably due to different environmental conditions and placement of the remote sensors. If readings are in question, check the sensor placement tips included in this manual.

Q:“The weather forecast is inaccurate.”

A:Weather forecast predicts the weather for the next 12 to 24 hours, and does not reflect current weather conditions.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:

Do not immerse the units in water.

Do not clean the units with abrasive or corrosive materials that might scratch plastic parts or corrode electronic circuits.

Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.

Do not tamper with the product’s internal components. Doing so will invalidate the warranty and may cause damage. The product contains no user-serviceable parts.

Use only fresh batteries. Do not mix new and old batteries.

Read the user's manual thoroughly before operating the product.

Appendix - City Codes

The Table below will assist in determining the appropriate time zones.

28

Image 28
Contents Honeywell Table of Contents Appendix City Codes SpecificationsStandard Package Contents InstallationIntroduction Before you beginFeatures Thermo-Hygrometer Sensor TS33CPlacement tips Battery installationMounting Rain Gauge TS906 Anemometer wind sensor TS805 Wind Vane Battery Cover AssemblyMain Unit TimeWeather DisplayAvoid placing the main unit in the following areas Buttons and Controls Selects the next available window counter-clockwise Clock and Alarms Window Clock and Calendar Displays Initial Set upOperation and Window Selection Selecting Clock and Alarm Window Initial Settings City, Time, Date and LanguageCustom Weather Station Settings Pressure and Weather Forecast WindowChanging or Setting Sea Level Pressure Select Pressure and Weather Forecast WindowPressure and Altitude Information Changing Pressure and Altitude ParametersChanging or Setting Altitude Viewing the Pressure, Temperature and Humidity Bar ChartsViewing the Moon Phase History Viewing the Sea Level Pressure HistoryMoon Phase Diagram Weather Forecast Displays Temperature and Humidity Window Viewing Temperature and Humidity for each ChannelTemperature and Dew Point Displays Channel Auto-Scan DisplayTemperature in Celsius or Fahrenheit Temperature AlarmProgramming Upper and Lower limits for Temperature Alarm Disabling Temperature Alarm levelsRainfall Memory Reset Setting Rain Display inches or mmSetting up Daily Rainfall Alert Selecting Rain WindowConfiguring Wind Display Setting Wind Speed in km/h, mph, m/s or knotsDisabling the Daily Rainfall Alert Wind WindowResetting the Wind Statistics Memory Enable/Disable Time AlarmsEnabling or Disabling the Wind Alerts Wind Alert programming Programming Time Alarms Disable/Enable Snooze function Disable alarms Atomic Time ReceptionRemote Sensor Status Memory Reset ProcedureActivate Search for Remote Sensors Maintenance TroubleshootingAppendix City Codes Weather forecast is inaccuratePage Specifications Power 12 AA Batteries included Battery life alkalineWind Direction Wind SpeedWeight without batteries DimensionsDeclaration of Conformity
Related manuals
Manual 33 pages 7.28 Kb