Fusionbrands MS-IP700i, MS-AV700i manual Playing Music Content, Turning scan mode on

Page 20

4.Press any key to exit

Turning scan mode on

Scan mode allows the 700 Series to scan through preset VHF channels, looking for active channels.

Note: If the Squelch level is adjusted so that you can hear a constant hissing sound, the unit will not scan correctly. To correct this, see “Minimizing background noise”, above.

To turn scan mode on:

1.Press the Menu key.

2.Turn the Encoder to highlight the Scan menu item.

3.Press the Encoder to select the checkbox ( ). Scan mode is turned on and the

menu exits automatically.

Note: Pressing the Play / Pause, Forward or Rewind key turns scan mode off.

PLAYING MUSIC CONTENT

Before you can use your media device as an input source you must first connect the device to the FUSION stereo as described in the installation section.

To listen to audio from your iPod, MTP device, Bluetooth device or USB FLASH drive:

ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over USB. It has been adopted on a number of platforms including Android. FUSION currently supports a range of smartphones utilising MTP.

Refer to www.fusionelectronics.com for the latest list of support devices.

MS-IP700i				• Press the iPod key. The iPod input source screen is
				displayed. The most recently selected track starts
				displayed. The most recently selected track starts
				playing at the current play point.
	iPod			• To appear on the iPod source screen the iPod
	iPod			may be inserted either into the internal dock or
				may be inserted either into the internal dock or
				an external UNI-Dock or connected to the external
				USB connector.

MS-AV700i,				• Press the Auxiliary key. Keep pressing the key until
MS-IP700i				the iPod (MS-AV700i only), USB, Bluetooth or MTP
				source screen is displayed.

Auxiliary

19

Image 20

Contents Series Manual Using iPod Care and MaintenanceUSB Flash Drives Handling CD or DVD disc’s MS-AV700i model onlyRegister Your Product Online Contents Page Brightness User Interface and ControlsMute Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menusAdjusting levels Accessing MenusGetting Started To power the unit on or offOpening Control Screens Adjusting Volume Level Zone 1 Zone 2 Zone 3 Zone 4 All Zones To adjust the volume levelTo mute and unmute the volume To set sub-woofer levels or tone Clock To set the alarm To clear the alarmTo adjust the brightness of the display screen To select one of the available tuner bands TunerTo tune to a required frequency, channel or preset SiriusXMScans through preset channels, pausing on a Only available if there are two or more presetsTurn scan mode off. For further details see Turning Scan mode on onTo remove one or more presets Playing Music Content Turning scan mode onControlling iPod Playback Selecting tracks from a playlistControlling Playback Initial Song Title Loading From MTP Devices Music Folder StructureSelecting audio tracks from a MTP media device Browsing Music Collections Over Bluetooth Not Supported To change a setting in the iPod settings menuRepeat ShuffleTo listen to input from an auxiliary device Auxiliary InputAdditional Features Examples of auxiliary input source screensEthernet Support Change source Volume Up / Down MS-AV700i model onlyDVD source selected Random / ShuffleDVD source not selected Following keys work for the SiriusXM sourceInstalling the 700 Series Dimensions side view MS-IP700i iPod/iPhone video only, MS-AV700i DVD video only ConnectionsConnect an AM/FM marine antenna Zone 2 Line Out White wire Low level output Zone 3 Line Out Grey wire Low level outputZone 4 Line Out Black wire Low level output White RCA = Left OutputZone Installation MS-IP700i or MS-AV700i Selecting and setting up a zone EnabledTo enable or disable the selected Zone For further details, see instructions belowTo enable or disable the internal amplifiers for Zones 1 Volume controlTo enable or disable volume control Select the Internal amplifier on menu itemVolume limit To specify the volume limit for the selected ZoneYou can access the screen Sub-woofer levelWhen using your music device with either model To enter the name for the selected ZoneTo insert your iPod OpenTo connect your USB flash drive, you will need MS-AV700i and MS-IP700i ModelsTo connect your iPod, you will need MS-UNIDOCK Tuner Region Australasia-Europe-Japan Connecting auxiliary deviceTuner Region USA Adjusting Auxiliary input level Recommended settings are listed belowSettings Clock Set clock To set the clockTo select 12 or 24 hour clock display mode Enabling the SiriusXM SourceActivating your SiriusXM tuner SeeTo select a channel SiriusXM menu optionsChannels To select a Category Padlock iconCategory To enter Parental menu Parental modeTo change the Parental mode access code To access a locked channel Channel Locking / unlockingTo lock or unlock a channel Sub filterTo change the sub filter setting To enable or disable the key soundPower save To enable or disable power saving modeTo change the Tel mute setting To change the tuner region settingTo change the VHF region setting Tel muteTo enable or disable the AM of VHF tuner sources Accessory Shared BT-200 Bluetooth & SiriusXM SourceSet Aux name Set device nameInternet Protocol IP Setting 700 Series Only Factory ResetTo reset your 700 Series to factory default values Static IP AddressAppendices Problem Solution GeneralProblem Solution SiriusXM Problem Solution Bluetooth ‘Channel Unsubscribed’Problem Solution IPod/iPhone?Problem Solution MTP Device Problem Solution Wireless Remote App for iPad and iPhoneGeneral specifications Tuning rangeSpecifications FCC compliance statementVHF tuning range SUPPORT, Sales and ServiceJapan LicensingSeries Android MTPAuxiliary input ChannelsPresets Remote controlsKeys MenusSettings Source screensSub-woofer level TunerZones VolumeUSB flash drive Page Page MAN000001G