Fusionbrands MS-IP700i, MS-AV700i manual Connections, Connect an AM/FM marine antenna

Page 32

CONNECTIONS

DESCRIPTION	COLOUR
Battery +12VDC	Yellow
Accessory +12V switched	Red
Negative Ground	Black
Remote Amplifier Enable ouput	Blue/White
Dim input [12VDC active]	Orange
Telemute input [GND active]	Brown

Note: All +12V wiring MUST be fused at the power source end of your cable, with a 15 A fuse. When the red “Accessory +12V switched” wire is not required in your installation, it MUST be connected together with the Yellow “Battery +12V” wire at the MS-700i head unit wiring loom.

When connecting the Dim input ensure the wire gauge used is suitable for the fuse supplying the circuit being connected to.

ANTENNA CONNECTION

Connect an AM/FM marine antenna.

Note: Do Not Connect to a VHF splitter

AUX INPUT

Connect an Auxiliary source to the left and right RCA (White = L, Red = R).

VIDEO CONNECTION

(MS-IP700i iPod/iPhone video only, MS-AV700i DVD video only)

Connect the composite video output (Yellow = Video) to a TV / LCD monitor (MS-IP700i iPod/iPhone video is only available if device is inserted in internal dock).

USB CONNECTION

Connect an Apple sync cable (not included), or USB Flash Drive (not included) or connect the MS-UNIDOCK Portable Media Device Dock (not included)

NMEA2000 / WIRED REMOTE

For connection to a MS-NRX200i Remote (not included).

For connection to an existing NMEA2000 Bus a CAB000852 Drop Cable (not supplied) and CAB000581 T-Connector (not supplied) are required.

IMPORTANT NOTE:

1.The CAB000851 drop cable supplied with the 700 Series is required for connection to a FUSION Remote Control Network (FRCN).

Note: FUSION recommends updating all remote(s) software via the MS-700i at time of installation to ensure compatibility. This can be done via the Update menu. Please refer to your remote manual for more information.

31

Image 32

Contents Series Manual Using iPod Care and MaintenanceUSB Flash Drives Handling CD or DVD disc’s MS-AV700i model onlyRegister Your Product Online Contents Page Brightness User Interface and ControlsMute Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menusAdjusting levels Accessing MenusGetting Started To power the unit on or offOpening Control Screens Adjusting Volume Level Zone 1 Zone 2 Zone 3 Zone 4 All Zones To adjust the volume levelTo mute and unmute the volume To set sub-woofer levels or tone Clock To set the alarm To clear the alarmTo adjust the brightness of the display screen To select one of the available tuner bands TunerTo tune to a required frequency, channel or preset SiriusXMScans through preset channels, pausing on a Only available if there are two or more presetsTurn scan mode off. For further details see Turning Scan mode on onTo remove one or more presets Playing Music Content Turning scan mode onControlling iPod Playback Selecting tracks from a playlistControlling Playback Initial Song Title Loading From MTP Devices Music Folder StructureSelecting audio tracks from a MTP media device Browsing Music Collections Over Bluetooth Not Supported To change a setting in the iPod settings menuRepeat ShuffleTo listen to input from an auxiliary device Auxiliary InputAdditional Features Examples of auxiliary input source screensEthernet Support Change source Volume Up / Down MS-AV700i model onlyDVD source selected Random / ShuffleDVD source not selected Following keys work for the SiriusXM sourceInstalling the 700 Series Dimensions side view MS-IP700i iPod/iPhone video only, MS-AV700i DVD video only ConnectionsConnect an AM/FM marine antenna Zone 2 Line Out White wire Low level output Zone 3 Line Out Grey wire Low level outputZone 4 Line Out Black wire Low level output White RCA = Left OutputZone Installation MS-IP700i or MS-AV700i Selecting and setting up a zone EnabledTo enable or disable the selected Zone For further details, see instructions belowTo enable or disable the internal amplifiers for Zones 1 Volume controlTo enable or disable volume control Select the Internal amplifier on menu itemVolume limit To specify the volume limit for the selected ZoneYou can access the screen Sub-woofer levelWhen using your music device with either model To enter the name for the selected ZoneTo insert your iPod OpenTo connect your USB flash drive, you will need MS-AV700i and MS-IP700i ModelsTo connect your iPod, you will need MS-UNIDOCK Tuner Region Australasia-Europe-Japan Connecting auxiliary deviceTuner Region USA Adjusting Auxiliary input level Recommended settings are listed belowSettings Clock Set clock To set the clockTo select 12 or 24 hour clock display mode Enabling the SiriusXM SourceActivating your SiriusXM tuner SeeTo select a channel SiriusXM menu optionsChannels To select a Category Padlock iconCategory To enter Parental menu Parental modeTo change the Parental mode access code To access a locked channel Channel Locking / unlockingTo lock or unlock a channel Sub filterTo change the sub filter setting To enable or disable the key soundPower save To enable or disable power saving modeTo change the Tel mute setting To change the tuner region settingTo change the VHF region setting Tel muteTo enable or disable the AM of VHF tuner sources Accessory Shared BT-200 Bluetooth & SiriusXM SourceSet Aux name Set device nameInternet Protocol IP Setting 700 Series Only Factory ResetTo reset your 700 Series to factory default values Static IP AddressAppendices Problem Solution GeneralProblem Solution SiriusXM Problem Solution Bluetooth ‘Channel Unsubscribed’Problem Solution IPod/iPhone?Problem Solution MTP Device Problem Solution Wireless Remote App for iPad and iPhoneGeneral specifications Tuning rangeSpecifications FCC compliance statementVHF tuning range SUPPORT, Sales and ServiceJapan LicensingSeries Android MTPAuxiliary input ChannelsPresets Remote controlsKeys MenusSettings Source screensSub-woofer level TunerZones VolumeUSB flash drive Page Page MAN000001G