Fusionbrands MS-AV700i, MS-IP700i manual Ms-Unidock

Page 43

To connect your iPod, MTP device or USB FLASH drive to the 700 Series via a UNI-Dock:

IMPORTANT NOTE:

ONLY PHONES

AND DEVICES

THAT FEATURE

BOTTOM MOUNTED

CONNECTORS

ARE SUPPORTED.

DEVICES WITH SIDE

CONNECTORS ARE

NOT SUPPORTED.

Portable media device dock

(MS-UNIDOCK)

1.Slide the door catch and open the door of the UNI-Dock.

2.To connect your Apple or MTP device, first select the appropriate adaptor cable, provided with the UNI-Dock. Slide out the tray and using the adaptor cable connect your device to the internal USB connector. Place your device in the tray and slide the tray back into the UNI-Dock. Close the door firmly.

3.To connect your USB FLASH drive insert it directly into the USB internal connector.

4.Select the source (USB, MTP or iPod) from the FUSION Stereo, as required.

To connect your iPod, MTP device or USB FLASH drive via the external USB cable:

1.Plug the Apple Sync Cable for Apple devices or the Micro-USB cable for your MTP device into your device.

2.Connect your device to the USB Cable at the rear of the stereo.

3.Select the source (USB, MTP or iPod) from the FUSION Stereo, as required.

IMPORTANT NOTE: The MS-IP700i Stereo (with internal dock) does NOT support multiple iPods connected simultaneously. Correct operation is only guaranteed with a single device connected.

42

Image 43

Contents Series Manual Handling CD or DVD disc’s MS-AV700i model only Using iPodCare and Maintenance USB Flash DrivesRegister Your Product Online Contents Page Mute User Interface and ControlsBrightness You can use the Menu key to open or to exit from menus Rotary Encoder and Menu KEYAccessing Menus Adjusting levelsOpening Control Screens To power the unit on or offGetting Started Adjusting Volume Level To mute and unmute the volume To adjust the volume levelZone 1 Zone 2 Zone 3 Zone 4 All Zones To set sub-woofer levels or tone Clock To clear the alarm To set the alarmTo adjust the brightness of the display screen Tuner To select one of the available tuner bandsSiriusXM To tune to a required frequency, channel or presetScan mode on on Scans through preset channels, pausing on aOnly available if there are two or more presets Turn scan mode off. For further details see TurningTo remove one or more presets Turning scan mode on Playing Music ContentControlling Playback Selecting tracks from a playlistControlling iPod Playback Music Folder Structure Initial Song Title Loading From MTP DevicesSelecting audio tracks from a MTP media device Shuffle Browsing Music Collections Over Bluetooth Not SupportedTo change a setting in the iPod settings menu RepeatAuxiliary Input To listen to input from an auxiliary deviceExamples of auxiliary input source screens Additional FeaturesEthernet Support Random / Shuffle Change source Volume Up / DownMS-AV700i model only DVD source selectedFollowing keys work for the SiriusXM source DVD source not selectedInstalling the 700 Series Dimensions side view Connect an AM/FM marine antenna ConnectionsMS-IP700i iPod/iPhone video only, MS-AV700i DVD video only White RCA = Left Output Zone 2 Line Out White wire Low level outputZone 3 Line Out Grey wire Low level output Zone 4 Line Out Black wire Low level outputZone Installation MS-IP700i or MS-AV700i For further details, see instructions below Selecting and setting up a zoneEnabled To enable or disable the selected ZoneSelect the Internal amplifier on menu item To enable or disable the internal amplifiers for Zones 1Volume control To enable or disable volume controlSub-woofer level Volume limitTo specify the volume limit for the selected Zone You can access the screenTo enter the name for the selected Zone When using your music device with either modelOpen To insert your iPodTo connect your iPod, you will need MS-AV700i and MS-IP700i ModelsTo connect your USB flash drive, you will need MS-UNIDOCK Tuner Region USA Connecting auxiliary deviceTuner Region Australasia-Europe-Japan To set the clock Adjusting Auxiliary input levelRecommended settings are listed below Settings Clock Set clockSee To select 12 or 24 hour clock display modeEnabling the SiriusXM Source Activating your SiriusXM tunerChannels SiriusXM menu optionsTo select a channel Category Padlock iconTo select a Category To change the Parental mode access code Parental modeTo enter Parental menu Channel Locking / unlocking To access a locked channelSub filter To lock or unlock a channelTo enable or disable power saving mode To change the sub filter settingTo enable or disable the key sound Power saveTel mute To change the Tel mute settingTo change the tuner region setting To change the VHF region settingSet device name To enable or disable the AM of VHF tuner sourcesAccessory Shared BT-200 Bluetooth & SiriusXM Source Set Aux nameStatic IP Address Internet Protocol IP Setting 700 Series OnlyFactory Reset To reset your 700 Series to factory default valuesProblem Solution SiriusXM Problem Solution GeneralAppendices ‘Channel Unsubscribed’ Problem Solution BluetoothIPod/iPhone? Problem SolutionProblem Solution Wireless Remote App for iPad and iPhone Problem Solution MTP DeviceFCC compliance statement General specificationsTuning range SpecificationsLicensing VHF tuning rangeSUPPORT, Sales and Service JapanChannels SeriesAndroid MTP Auxiliary inputMenus PresetsRemote controls KeysTuner SettingsSource screens Sub-woofer levelUSB flash drive VolumeZones Page Page MAN000001G