Fusionbrands MS-IP700i To enable or disable the AM of VHF tuner sources, Set Aux name, About

Page 54

To enable or disable the AM of VHF tuner sources:

1.Press the Menu key.

2.Turn and then press the Encoder to select the Settings > Sources.

3.If required, press the Encoder to enable the AM source ( ) or disable

the AM source ( ).

4.If required, turn the Encoder to select VHF then, press the Encoder to

enable the VHF source (

) or disable the VHF source (

).

5.Press any key to exit.

Set Aux name

Select `Set Aux name’ to give the AUX input a name that is more representative of the device connected to the AUX input. Select a name from the available list. The name is displayed on the AUX Source screen along with a matching graphic.

Accessory (Shared BT-200 Bluetooth & SiriusXM Source)

If you have installed the MS-BT200 Bluetooth module or SiriusXM Tuner (USA Only) you will need to enable the source. This operation will be determined by the Tuner region you have selected.

Tuner Region - USA

When USA Tuner region is selected, press the menu button and select Settings>Sources>Accessory then select the source to enable SiriusXM or Bluetooth.

Tuner Region - Australasia-Europe-Japan

In these Tuner regions once the MS-BT200 is installed and connected the source will be available.

Set device name

Select `Set Device Name’ to give the Stereo a network name of your choice. The name is visible to other devices (Marine Wired Remotes MS-NRX200i) connected to the same FUSION network. Rotate the rotary encoder to change the character. Press the rotary encoder to select. Press the `Previous’ button to delete characters. · To save changes press the `Play’ key. · To exit without saving any changes: press the Menu key.

About

This option displays the Stereo software version, remote control version and FUSION-Link software versions.

53

Image 54
Contents Series Manual USB Flash Drives Using iPodCare and Maintenance Handling CD or DVD disc’s MS-AV700i model onlyRegister Your Product Online Contents Page User Interface and Controls MuteBrightness Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menusAdjusting levels Accessing MenusTo power the unit on or off Opening Control ScreensGetting Started Adjusting Volume Level To adjust the volume level To mute and unmute the volumeZone 1 Zone 2 Zone 3 Zone 4 All Zones To set sub-woofer levels or tone Clock To set the alarm To clear the alarmTo adjust the brightness of the display screen To select one of the available tuner bands TunerTo tune to a required frequency, channel or preset SiriusXMTurn scan mode off. For further details see Turning Scans through preset channels, pausing on aOnly available if there are two or more presets Scan mode on onTo remove one or more presets Playing Music Content Turning scan mode onSelecting tracks from a playlist Controlling PlaybackControlling iPod Playback Initial Song Title Loading From MTP Devices Music Folder StructureSelecting audio tracks from a MTP media device Repeat Browsing Music Collections Over Bluetooth Not SupportedTo change a setting in the iPod settings menu ShuffleTo listen to input from an auxiliary device Auxiliary InputAdditional Features Examples of auxiliary input source screensEthernet Support DVD source selected Change source Volume Up / DownMS-AV700i model only Random / ShuffleDVD source not selected Following keys work for the SiriusXM sourceInstalling the 700 Series Dimensions side view Connections Connect an AM/FM marine antennaMS-IP700i iPod/iPhone video only, MS-AV700i DVD video only Zone 4 Line Out Black wire Low level output Zone 2 Line Out White wire Low level outputZone 3 Line Out Grey wire Low level output White RCA = Left OutputZone Installation MS-IP700i or MS-AV700i To enable or disable the selected Zone Selecting and setting up a zoneEnabled For further details, see instructions belowTo enable or disable volume control To enable or disable the internal amplifiers for Zones 1Volume control Select the Internal amplifier on menu itemYou can access the screen Volume limitTo specify the volume limit for the selected Zone Sub-woofer levelWhen using your music device with either model To enter the name for the selected ZoneTo insert your iPod OpenMS-AV700i and MS-IP700i Models To connect your iPod, you will needTo connect your USB flash drive, you will need MS-UNIDOCK Connecting auxiliary device Tuner Region USATuner Region Australasia-Europe-Japan Settings Clock Set clock Adjusting Auxiliary input levelRecommended settings are listed below To set the clockActivating your SiriusXM tuner To select 12 or 24 hour clock display modeEnabling the SiriusXM Source SeeSiriusXM menu options ChannelsTo select a channel Padlock icon CategoryTo select a Category Parental mode To change the Parental mode access codeTo enter Parental menu To access a locked channel Channel Locking / unlockingTo lock or unlock a channel Sub filterPower save To change the sub filter settingTo enable or disable the key sound To enable or disable power saving modeTo change the VHF region setting To change the Tel mute settingTo change the tuner region setting Tel muteSet Aux name To enable or disable the AM of VHF tuner sourcesAccessory Shared BT-200 Bluetooth & SiriusXM Source Set device nameTo reset your 700 Series to factory default values Internet Protocol IP Setting 700 Series OnlyFactory Reset Static IP AddressProblem Solution General Problem Solution SiriusXMAppendices Problem Solution Bluetooth ‘Channel Unsubscribed’Problem Solution IPod/iPhone?Problem Solution MTP Device Problem Solution Wireless Remote App for iPad and iPhoneSpecifications General specificationsTuning range FCC compliance statementJapan VHF tuning rangeSUPPORT, Sales and Service LicensingAuxiliary input SeriesAndroid MTP ChannelsKeys PresetsRemote controls MenusSub-woofer level SettingsSource screens TunerVolume USB flash driveZones Page Page MAN000001G