Fusionbrands MS-AV700i, MS-IP700i manual Selecting and setting up a zone, Enabled

Page 37

SETTING UP THE 700 Series

ZONES

Zone 1 and 2 are powered by the on board Class-D amplifier. External amplifiers are required to utilize the 4 line outputs and 4 subwoofer outputs. You can pre-set the balance, volume limit, sub-woofer level and name for each of the four Zones available on the 700 Series. If required, you can also:

•Enable or disable Zones 2, 3 and 4 (Zone 1 is always enabled).

•Enable or disable volume control (Zones 3 and 4 only).

•Link Zones 1 and 2.

For further details, see instructions below.

Rotary

Encoder

Menu key

Selecting and setting up a zone

To select a Zone and modify its settings: 1. Press the Menu key.

2. Turn and then press the Encoder to select Settings > Zone.

3.Turn and then press the Encoder to select the Zone you wish to work with.

4.Use any of the following instructions to update settings for the selected Zone.

Enabled

Zones 2–4 can be disabled if required. This is useful, for example, if only two

Zones have been set up, as disabled Zones are not displayed in any screens when setting levels.

To enable or disable the selected Zone:

a.Select the Enabled menu item.

b.Press the Encoder to enable ( ) or disable ( ) the selected Zone.

c.Press any key to exit

36

Image 37

Contents Series Manual Care and Maintenance Using iPodUSB Flash Drives Handling CD or DVD disc’s MS-AV700i model onlyRegister Your Product Online Contents Page Mute User Interface and ControlsBrightness You can use the Menu key to open or to exit from menus Rotary Encoder and Menu KEYAccessing Menus Adjusting levelsOpening Control Screens To power the unit on or offGetting Started Adjusting Volume Level To mute and unmute the volume To adjust the volume levelZone 1 Zone 2 Zone 3 Zone 4 All Zones To set sub-woofer levels or tone Clock To clear the alarm To set the alarmTo adjust the brightness of the display screen Tuner To select one of the available tuner bandsSiriusXM To tune to a required frequency, channel or presetOnly available if there are two or more presets Scans through preset channels, pausing on aTurn scan mode off. For further details see Turning Scan mode on onTo remove one or more presets Turning scan mode on Playing Music ContentControlling Playback Selecting tracks from a playlistControlling iPod Playback Music Folder Structure Initial Song Title Loading From MTP DevicesSelecting audio tracks from a MTP media device To change a setting in the iPod settings menu Browsing Music Collections Over Bluetooth Not SupportedRepeat ShuffleAuxiliary Input To listen to input from an auxiliary deviceExamples of auxiliary input source screens Additional FeaturesEthernet Support MS-AV700i model only Change source Volume Up / DownDVD source selected Random / ShuffleFollowing keys work for the SiriusXM source DVD source not selectedInstalling the 700 Series Dimensions side view Connect an AM/FM marine antenna ConnectionsMS-IP700i iPod/iPhone video only, MS-AV700i DVD video only Zone 3 Line Out Grey wire Low level output Zone 2 Line Out White wire Low level outputZone 4 Line Out Black wire Low level output White RCA = Left OutputZone Installation MS-IP700i or MS-AV700i Enabled Selecting and setting up a zoneTo enable or disable the selected Zone For further details, see instructions belowVolume control To enable or disable the internal amplifiers for Zones 1To enable or disable volume control Select the Internal amplifier on menu itemTo specify the volume limit for the selected Zone Volume limitYou can access the screen Sub-woofer levelTo enter the name for the selected Zone When using your music device with either modelOpen To insert your iPodTo connect your iPod, you will need MS-AV700i and MS-IP700i ModelsTo connect your USB flash drive, you will need MS-UNIDOCK Tuner Region USA Connecting auxiliary deviceTuner Region Australasia-Europe-Japan Recommended settings are listed below Adjusting Auxiliary input levelSettings Clock Set clock To set the clockEnabling the SiriusXM Source To select 12 or 24 hour clock display modeActivating your SiriusXM tuner SeeChannels SiriusXM menu optionsTo select a channel Category Padlock iconTo select a Category To change the Parental mode access code Parental modeTo enter Parental menu Channel Locking / unlocking To access a locked channelSub filter To lock or unlock a channelTo enable or disable the key sound To change the sub filter settingPower save To enable or disable power saving modeTo change the tuner region setting To change the Tel mute settingTo change the VHF region setting Tel muteAccessory Shared BT-200 Bluetooth & SiriusXM Source To enable or disable the AM of VHF tuner sourcesSet Aux name Set device nameFactory Reset Internet Protocol IP Setting 700 Series OnlyTo reset your 700 Series to factory default values Static IP AddressProblem Solution SiriusXM Problem Solution GeneralAppendices ‘Channel Unsubscribed’ Problem Solution BluetoothIPod/iPhone? Problem SolutionProblem Solution Wireless Remote App for iPad and iPhone Problem Solution MTP DeviceTuning range General specificationsSpecifications FCC compliance statementSUPPORT, Sales and Service VHF tuning rangeJapan LicensingAndroid MTP SeriesAuxiliary input ChannelsRemote controls PresetsKeys MenusSource screens SettingsSub-woofer level TunerUSB flash drive VolumeZones Page Page MAN000001G