Fusionbrands MS-AV700i, MS-IP700i manual Adjusting Auxiliary input level, To set the clock

Page 45

Adjusting Auxiliary input level

Many different types of auxiliary device (TV, DVD, Game Console, Media player) can be connected to the 700 Series, and these devices will have either a line output or headphone output jack.

To allow for the wide range of input levels from these devices, the AUX input has adjustable input gain. This should be adjusted to achieve a similar volume level to the other (fixed gain) input sources on the 700 Series.

To adjust auxiliary input level by changing the gain:

•Increase gain (volume) by pressing the Forward key (1dB steps up to 9dB)

•Decrease gain by pressing the Rewind key (1dB steps down to -9dB).

Recommended settings are listed below:

AUX Device	AUX gain
	setting (dB)
Portable media player with headphone output	-9dB to -6dB

CD/DVD player with line output	-6dB

Portable media player with line output	0dB

Game console with line output	0dB

Older audio/visual equipment with line output (for example: VHS or	6dB to 9dB
cassette deck)

Note: When using the headphone output of a portable device, it may be necessary to adjust the device’s own volume control for best audio quality.

CLOCK SETTING

The 700 Series unit has a built-in clock that can display the time in 12-hour or 24-hour mode.

To set the clock:

1.Press the Menu key.

2.Turn and then press the Encoder to select

Settings > Clock > Set clock.

The Set Clock screen is displayed.

3.Turn the Encoder to change the hour setting.

4.If required, press the Encoder to move to the minutes field. Turn the Encoder to change the minutes setting.

44

Image 45

Contents Series Manual Care and Maintenance Using iPodUSB Flash Drives Handling CD or DVD disc’s MS-AV700i model onlyRegister Your Product Online Contents Page User Interface and Controls MuteBrightness You can use the Menu key to open or to exit from menus Rotary Encoder and Menu KEYAccessing Menus Adjusting levelsTo power the unit on or off Opening Control ScreensGetting Started Adjusting Volume Level To adjust the volume level To mute and unmute the volumeZone 1 Zone 2 Zone 3 Zone 4 All Zones To set sub-woofer levels or tone Clock To clear the alarm To set the alarmTo adjust the brightness of the display screen Tuner To select one of the available tuner bandsSiriusXM To tune to a required frequency, channel or presetOnly available if there are two or more presets Scans through preset channels, pausing on aTurn scan mode off. For further details see Turning Scan mode on onTo remove one or more presets Turning scan mode on Playing Music ContentSelecting tracks from a playlist Controlling PlaybackControlling iPod Playback Music Folder Structure Initial Song Title Loading From MTP DevicesSelecting audio tracks from a MTP media device To change a setting in the iPod settings menu Browsing Music Collections Over Bluetooth Not SupportedRepeat ShuffleAuxiliary Input To listen to input from an auxiliary deviceExamples of auxiliary input source screens Additional FeaturesEthernet Support MS-AV700i model only Change source Volume Up / DownDVD source selected Random / ShuffleFollowing keys work for the SiriusXM source DVD source not selectedInstalling the 700 Series Dimensions side view Connections Connect an AM/FM marine antennaMS-IP700i iPod/iPhone video only, MS-AV700i DVD video only Zone 3 Line Out Grey wire Low level output Zone 2 Line Out White wire Low level outputZone 4 Line Out Black wire Low level output White RCA = Left OutputZone Installation MS-IP700i or MS-AV700i Enabled Selecting and setting up a zoneTo enable or disable the selected Zone For further details, see instructions belowVolume control To enable or disable the internal amplifiers for Zones 1To enable or disable volume control Select the Internal amplifier on menu itemTo specify the volume limit for the selected Zone Volume limitYou can access the screen Sub-woofer levelTo enter the name for the selected Zone When using your music device with either modelOpen To insert your iPod MS-AV700i and MS-IP700i Models To connect your iPod, you will need To connect your USB flash drive, you will need MS-UNIDOCK Connecting auxiliary device Tuner Region USATuner Region Australasia-Europe-Japan Recommended settings are listed below Adjusting Auxiliary input levelSettings Clock Set clock To set the clockEnabling the SiriusXM Source To select 12 or 24 hour clock display modeActivating your SiriusXM tuner SeeSiriusXM menu options ChannelsTo select a channel Padlock icon CategoryTo select a Category Parental mode To change the Parental mode access codeTo enter Parental menu Channel Locking / unlocking To access a locked channelSub filter To lock or unlock a channelTo enable or disable the key sound To change the sub filter settingPower save To enable or disable power saving modeTo change the tuner region setting To change the Tel mute settingTo change the VHF region setting Tel muteAccessory Shared BT-200 Bluetooth & SiriusXM Source To enable or disable the AM of VHF tuner sourcesSet Aux name Set device nameFactory Reset Internet Protocol IP Setting 700 Series OnlyTo reset your 700 Series to factory default values Static IP AddressProblem Solution General Problem Solution SiriusXMAppendices ‘Channel Unsubscribed’ Problem Solution BluetoothIPod/iPhone? Problem SolutionProblem Solution Wireless Remote App for iPad and iPhone Problem Solution MTP DeviceTuning range General specificationsSpecifications FCC compliance statementSUPPORT, Sales and Service VHF tuning rangeJapan LicensingAndroid MTP SeriesAuxiliary input ChannelsRemote controls PresetsKeys MenusSource screens SettingsSub-woofer level TunerVolume USB flash driveZones Page Page MAN000001G