Dakota Digital MX-5 operation manual Dakota Ultrasonics

Page 12

Dakota Ultrasonics

When the IN symbol is on, the MX-5is displaying a thickness value in inches. The maximum thickness that can be displayed is 19.999 inches.

When the MM symbol is on, the MX-5is displaying a thickness value in millimeters. If the displayed thickness exceeds 199.99 millimeters, the decimal point will shift automatically to the right, allowing values up to 1999.9 millimeters to be displayed.

When the IN symbol is on, in conjunction with the /μs symbol, the MX-5is displaying a sound-velocity value in inches-per-microsecond.

When the M symbol is on, in conjunction with the /s symbol, the MX-5is displaying a sound-velocity value in meters-per-second.

8

Image 12

Contents P-114-0002 Page Contents DisclaimerBlank Introduction Blank Operation KeypadDakota Ultrasonics MX-5 Ultrasonic Thickness Gauge Dakota Ultrasonics Display Dakota Ultrasonics Transducer Making Measurements MX-5 Ultrasonic Thickness Gauge Condition and Preparation of Surfaces Probe Zero Performing a Probe-ZeroCalibration Calibration to a known thickness Calibration to a known velocity Two Point Calibration Scan Mode Moving series of dashes instead of a thickness value. WhenAlarm Mode Using the BeeperDifferential Mode RS232 Serial Port Connecting To a Computer Transducer Selection Dakota Ultrasonics MX-5 Ultrasonic Thickness Gauge Blank Product Specifications Physical Appendix aBlank Appendix B Application Notes ∙ Measuring pipe and tubing∙ Measuring laminated materials MX-5 Ultrasonic Thickness Gauge Blank Appendix C Sound Velocities of some Common MaterialsBlank Warranty Information ∙ Warranty Statement ∙SONOTECH, INC