Delta DO 9704 manual P1+, Storage, Hours minutes Seconds

Page 11

KEY	SIMBOLS LIT BESIDES
		THE NUMBERS
	P1+	= erase memory

storage

P2+ = interval programming

hours minutes

seconds

ENGLISH

FUNCTION

DESCRIPTION

When the skey (MEMORY CLEAR sub-function) is pressed with P1 on the display, all the sto- red data are erased.

The instrument will display the message P1. At the end the instrument automatically returns to normal operating mode.

- P2 -

When ENTER is pressed with P2 on the display, the storage time parameter may be modified.

This parameter is used for the fol- lowing two functions:

1.Logging time, or time elapsing between two consecutive data storages in he internal memory of the instrument.

2.Data dump interval, or time ela- psing between two immediate data dumps on the serial line.

The sand tkeys are used to define the desired intervention time.

At bottom right of the display the instrument indicates the seconds (1 - 59).

At top right of the display the instrument indicates the minutes (1 - 59).

At top left of the display the instru- ment indicates the hours (1 - 12).

75

Image 11

Contents Instructions Manual Page Pressure and Temperature DATA-LOGGER English Introduction Numbers Keyboard KEYREL Function DescriptionSimbols LIT Besides NumbersSerial Output Simbols LIT Besides Function Numbers DescriptionTom of the display 600 Baud P0+Press the Prog key to move on to step P1 300 BaudP1+ = data dump This parameter is used for the fol- lowing two functions P1+Storage Hours minutes SecondsFunction P4+ = set year P3+P5+ = set month P6+ = set day P7+ = set hours P8+ = set minutes Self cut-out P9+Complete printing Reduced printing P10+To stop storage, press the Enter key P10+ Start-Stop P11+P11 Data CallChes itself off again Operating modeWhen this operative KEY Simbols LIT BesidesSimbols LIT Besides Function Numbers Description Enter If the battery symbol does not flaAfter having taken note Restart itMore than 30,000 acquisitions Probe Connection HOW to MeasureVarious operations Method of Using the Instrument and Warnings Temperature MeasurementLOU Instrument Signals and MalfunctionsErr FULLOW Battery Warning and Battery Replacement Serial Interface RS 232C Storage of the InstrumentDumping data from the memory Command Type ReplyParity None Bit Stop bit Protocol Xon/Xoff Type of terminalMemory clear Printer Diagram doExample of a Report Printed by the Instrument English Software connection with Windows Hardware connectionOK to confirm the setting one click Mark local Echo one click 100 101 102 Switch on the measuring instrument103 OK to confirm Cancel in the next window104 Parity None105 106 107 108 109 110 To end receiving data from an instrumentSelect END from the pull-down sub-menu one click To quit running the Hyper TerminalVdc=465.5 Calibrating the Instrument doFlow Rate Measurements 113 Probe connection diagram Instrument doConnection of Probes to the Pressure Gauge Data Logger do Between 4 SEL R100 105 110 115 Turbine probe for measuring flow rateGauge Classification of Pressure MeasurementsConversion Factors and Tables = 2,491 x 102 Pa Psi = PaPsi = kPa = 3,386 x 103 Pa118 Minimum, Mean, Relative, A-B differential Instrument Technical DataConnector DIN 45326 8-pole Weight / dimensions 320 gr. / 215x73x38 mm120 121 Order Codes Guarantee 124 Examples of USE of the KeyboardSerial line Display blocked125 Pressing Data Call repeatedly givesInstrument programming 127 Sets yearSets day Sets hourData printing is reduced 128 Enables self cut-out +Normal operating Date and timeSerial output active Activation or disactivation of the serial outputActivation or disactivation of the Record function Function130 Activation and disactivation of the storage function131 Index132 EN61000-4-2, EN61010-1 level Safety