Edelweiss EQ1-DYN manual RS-232, RS-422

Page 27

OPERATING INSTRUCTIONS FOR GAMBIT EQUALIZER EQ1-DYN	TECHNICAL DATA

RS-232

The implementation is equal to MIDI.

Connector Type:D-SUB female, 9 pin, Pinout: pin 1: n.c.

pin 2: RS232 output

pin 3: RS232 input

pin 4: connected to pins 6, 8

pin 5: ground

pin 6: connected to pins 4, 8

pin 7: n.c.

pin 8: connected to pins 4, 6

pin 9: n.c.

The implementation is equal to MIDI.

Connector Type:D-SUB female, 9 pin, Pinout: pin 1: remote input +

pin 2: remote output +

pin 3: n.c.

pin 4: ground

pin 5: ground

pin 6: remote input -

pin 7: remote output -

pin 8: ground

pin 9: ground

Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster		Page 27 of 27
) +41 1 940 20 06 2 +41 1 940 22 14	8 http://www.weiss.ch	* weiss@weiss.ch

Image 27

Contents Gambit EQ1-DYN Contents Front Panel Front Panel Groups Display Remote ControlIntroduction ProcessingPeak Group OperationStatus Display Channel Status GroupDither Icon Snapshot DisplayWhat Is a Band? Band ParametersRange Controls Dynamic Correcting musical instrument volume imbalancesSetup ModeOn/Off Store BackupComparison RecallBackup will overwrite safe snapshots Reset DumpingLoading EQ Bypass Display ResolutionDither LCD ContrastChannel Software InformationSelf Test ProtocolAES/EBU Channel Status Data Technical DataAES/EBU Input AES/EBU OutputOutput selected Consumer format Output selected Professional format Power OverloadFilters Applicable to peaking filters Parameter TableFrequencies in Hertz Boost/Cuts, applicable to shelving and peaking filtersOverall Gain Shape, applicable to shelving filtersThreshold, applicable to dynamic peaking filters Slope, applicable to cut filtersDither Midi Implementation Remote Control ProtocolCH1 / 2 Select Byte Value Workspace and Settings request RS-422 RS-232