4 SET MODE
DSETTING THE CTCSS TONE FREQUENCY (continued)
•CTCSS confirmation beep
Push [PTT] | Confirmation beep | Push [PTT] | Confirmation beep |
| ||||
no | ● | 5 | (Fifth) | ●●●●● |
| |||
1 | (Once) | ● | 6 | (Sixth) |
|
| ● |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
2 | (Twice) | ●● | 7 | (Seventh) |
|
| ●● |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
3 | (Third) | ●●● | 8 | (eighth) |
|
| ●●● |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
4 | (Fourth) | ●●●● | 9 | (ninth) |
|
| ●●●● |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
●; Single beep
; Long beep
DSETTING THE DTCS CODE
This transceiver is equipped with 83 DTCS codes. DTCS operation provides communication with silent standby since you will only re- ceive calls from group members using the same DTCS number.
You can assign different numbers to CH 1 to CH 15 independently.
qWhile pushing and holding [PTT], [MONI], [W/N], turn [OFF/VOL] to power ON.
wSelect the desired CH 1 to CH 15 that you want to assign the DTCS code to.
ePush and hold [W/N] until a beep (Pi) is emitted.
rPush [PTT] the necessary number of times to choose the 100
digit of the desired code number.
tPush [MONI].
•Confirmation beep is emitted. (See p. 17)
yPush [PTT] the necessary number of times to choose the 10 digit
of the desired code number.
uPush [MONI].
•Confirmation beep is emitted. (See p. 17)
iPush [PTT] the necessary number of times to choose the 1 digit of the desired code number.
oPush [MONI].
17