OPERATION 5
‘Receiving and transmitting
NOTE: Transmitting without an antenna may damage the trans- ceiver. See p.4 for antenna attachment.
Turn power ON as described on p. 2.
Program the SIMPLEX/DUPLEX OPERATION and CTCSS /DTCS tone number (select CH 0 if you will not use the CTCSS function) before operation.
Receiving:
qSelect the desired channel.
wListen for a transmission and adjust [VOL] to a comfortable lis- tening level.
•When no transmission is heard, push and hold [MONI] while adjusting [VOL].
The transceiver is now set to receive desired calls on the selected channel.
Transmitting:
Wait for the channel to become clear to avoid interference.
eWhile pushing and holding [PTT], speak into the microphone at a normal voice level.
rRelease [PTT] to return to receive.
IMPORTANT: To maximize the readability of your transmitted sig- nal, pause a few sec. after pushing [PTT], hold the microphone 10 to 15 cm from your mouth and speak at a normal voice level.
20