Icom IC-4008E instruction manual Group Mode Ctcss, ‘ Setting the group code

6 GROUP MODE (CTCSS)

‘Setting the group code

The IC-4008E is equipped with 38 group codes. Group mode op- eration provides communication with silent standby since you will only receive calls from group members using the same group num- ber.

First of all, set the same group code number for all group member’s transceivers.

Turn ON the group mode operation:

qPush [MODE] to enter set mode.

•“ ---” (group mode OFF) appears on the display.

wPush [UP]/[Y] or [DOWN]/[Z] to select the desired code number.

ePush [MODE] to set the group code number.

Cancel the group mode operation:

qPush [MODE] to enter set mode.

•Code number disappears on the dis- play.

wPush [UP]/[Y] or [DOWN]/[Z] to select “ ---” (group mode OFF).

ePush [MODE] to cancel the group mode.

w w

	R
UP	POWE
	MODE
DOWN	q

NOTE: Only stations with the same group channel number can be heard during group mode operation, even when the busy in- dicator appears on the display.

11