Icom IC-4008E instruction manual ‘ ATS Automatic Transponder System, ‘ Low battery indicator

8 OTHER FUNCTIONS

‘ATS (Automatic Transponder System)

This allows you to confirm whether or not a call has reached the re- ceiving party even if the operator is temporarily away from the transceiver. No “Ring” tone is emitted with this function.

➥ Push [MODE], while [PTT] is
ON	to turn the	function		appears.
ON/OFF.
• “	” appears on the display.
• The	transceiver	starts	to send a		R
searching signal every 60 sec.				UP	POWE
					MODE
- When the transceiver receives an				DOWN
answer back signal, “			” stays on

the display until the next search transmit.

- If no reply is received, “ ” blinks until the next search transmit.

NOTE: Above setting is for the calling station only. A called party automatically sends an answer back signal without any preset- tings.

All IC-4008E’s operating on the same operating channel will an- swer back to your call in your communication area.

‘Low battery indicator

➥Appears when the battery is nearing exhaustion.

•A warning beep is emitted while turn- ing the power ON.

➥Appears and blinks when battery re- placement is necessary.

17